Video Chat with a Pro Video Expert - Live

Sachtler aktiv8T Touch & Go Fluid Head with SpeedLevel & 7-Step Drag for Sachtler Tripods (75mm)

BH #SAS2068T • MFR #S2068T
Print
Sachtler aktiv8T Touch & Go Fluid Head with SpeedLevel & 7-Step Drag for Sachtler Tripods (75mm)
Key Features
  • 26.5 lb Capacity Fluid Drag Head
  • 75mm Half Ball
  • SpeedSwap Clamp-Style Base
  • SpeedLevel Technology
The aktiv8T Sideload Fluid Head uses Sachtler's truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on Sachtler 75mm tripod legs. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for larger DSLRs, mirrorless, and digital cine-style cameras, the aktiv8T supports rigs weighing up to 26.5 pounds. This fluid head features 15 steps of counterbalance and seven steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.
More Details
In Stock
No Store Display
Free Expedited Shipping
Camera Plate Type
Ask an Expert
800-606-6969

Sachtler aktiv8T Overview

The aktiv8T Sideload Fluid Head uses Sachtler's truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on Sachtler 75mm tripod legs. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for larger DSLRs, mirrorless, and digital cine-style cameras, the aktiv8T supports rigs weighing up to 26.5 pounds. This fluid head features 15 steps of counterbalance and seven steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.

The SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.

When used with a separately available flowtech tripod, the activ8T enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also now mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3/8"-16 threaded stud.

The PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble level and the drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are at set at maximum height or an awkward angle.

Mount your camera using the aktiv8T Touch & Go plate with both 1/4-20" and 3/8"-16 camera screws. A sliding range of 2.4" helps the head to quickly balance variously configured rigs. The Sachtler aktiv8T head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.

aktiv Fluid Head Compatibility
The aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75/2 AL, SpeedLock 75, ENG 75/2 D, DA 75L)
Features
SpeedLevel Technology
Use the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place
SpeedSwap Base
Centered around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider
PrismBubble Level
The illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions
26.5 lb Capacity Fluid Head
This 26.5 lb capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and pro-style digital cine cameras
Stepped Counterbalance and Drag
15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts
Touch & Go Plate
The Touch & Go platform provides quick camera mounting with 2.4" of travel for balancing your rig and both 1/4"-20 and 3/8"-16 camera screws

Sachtler aktiv8T Specs

Key Specs
Camera Mounting
1/4"-20 & 3/8"-16 Screws (Quick Release w/ Sliding Balance Plate: Touch & Go Plate S)
Head Type
Fluid Head
Drag Control
Yes
Load Capacity
26.5 lb / 12 kg
Weight
6.2 lb / 2.8 kg
Head
Camera Mounting
1/4"-20 & 3/8"-16 Screws (Quick Release w/ Sliding Balance Plate: Touch & Go Plate S)
Head Type
Fluid Head
Base Mount
75 mm Half Ball
Counter Balance
Continuous 15-Step Plus 0
Dimensions
Camera Plate: 2.4 x 1.8" / 62.00 x 45.00 mm
Height: 6.2" / 158.00 mm
Pan & Tilt
Drag Control
Yes
Independent Pan Lock
Yes
Independent Tilt Lock
Yes
Vertical Tilt
+90° to -70°
General
Load Capacity
26.5 lb / 12 kg
Accessory Mounting
2x Pan Handle Fitting
Bubble Level
Yes (Illuminated)
Weight
6.2 lb / 2.8 kg
Packaging Info
Package Weight
10 lb
Box Dimensions (LxWxH)
17.25 x 9.05 x 6.55"

Sachtler aktiv8T Reviews

Be Prepared for the conversion for older Flowtech Legs

By William
Rated 3 out of 5
Date: 2022-09-30

I didn't realize when I purchased the head I would need to send my original legs in to have a conversion performed to accept the new aktiv8 head. While Sachtler does pay for the shipping and the conversion, it takes longer than the 5 days they claim on the website. When I sent the legs in they were working fine, but now the company doing the conversion is recommending repairs to the top and bottom brakes.... wondering if its a way for them to make some additional money? Not sure, but I wasn't having any issues before sending it in so I'm going to pass.... frustrated with how long it's taking to get the conversion done while I improvise with other tripods. Hoping the new head design will be worth the wait, perhaps I'll give it a higher rating once I have a chance to put it to the test.

a beast

By Dan
Rated 5 out of 5
Date: 2021-05-13

small but mighty, this holds the fx6 with no issues and then some.

See any errors on this page?
Whatever You Need, We've Got It