The AX1 Pixel Tube 8-Light Kit from Astera helps you achieve a complete lighting solution for in the studio or on location work. The kit includes eight battery-powered 3.4' RGB tubes, each with accessories for support, mounting, and charging. A rigid charging case equipped with a charging box is also included to recharge, transport, and store the entire kit.
The Astera AX1 Pixel Tube RGB LED Tube Light emits up to 253 lux at 3.3' (5500K) with an integrated battery that is suitable for a variety of uses in film, theater, and event productions. The AX1 features 16 individually addressable LED emitters in a 3.4' long tube that you can mount into a set, on a stand, hang from a grid, or even hold in your bare hand. The AX1 features a CRI/TLCI rating of 88, which provides for good color rendition. The fixture can be used to create a soft, direct light on your subject or as an accent light, as well as a design element in the location or set.
The fixture features five different Dimming Curve modes, as Astera refers to it. The selection of these modes, along with the Pulse Width Modulation dimming of the fixture, enables flicker-free video shooting. The Pixel Tube features an integrated battery that charges in approximately seven hours and has a runtime of 20 hours. It can be controlled remotely by IR, a downloadable app, and wireless DMX. The Pixel Tube has an IP rating of 65 for dust and water ingress when the rubber plug to cover the charging port is in place. The IP65 rating means the fixture is completely dust-tight and impervious to low-pressure jets, which means you can use this fixture in dusty environments and in wet conditions.
- You can use an Astera ARC1 infrared remote control (not included); simply point it at individual lights to set the desired effect.
- The downloadable AsteraApp is an efficient way to quickly create a customized light show using your device. It can group several lights together, address individual lights or groups of lights, and send complex effects with a user-defined color palette to all lights in range. Please note the AsteraBox (not included) is required to control the light fixture through the app. You can also use the Astera ARC2 remote control (not included).
- The light can also be controlled by CRMX wireless DMX, as the built-in receiver is compatible with all LumenRadio CRMX transmitters as well as W-DMX G2, G3, G4, and G4S transmitters, although G4 and G4S are only supported in 2.4 GHz mode.
- You can also use an Astera ART3 Wireless DMX Transmitter to send DMX in the UHF frequency band, although CRMX is the recommended method.
902 to 928 MHz
2.4 GHz
- Fast: For pixel mapping and similar applications, it provides a totally unfiltered response.
- Standard: Good compromise between response and smoothness for most applications.
- Halogen: When slow and smooth dimming is required, it emulates the characteristics of a halogen light.
- Theater: It provides a very smooth response and increased dynamics, although some colors are darker in this mode.
- TV: For broadcast and other shows, the dimming response is faster but still smooth dimming. Although this mode produces less blue light due to its fixed white point of 6500K, it also provides increased dynamics, with some colors being darker.
The AX1 Charging Box from Astera will power 8 AX1 PixelTube integrated batteries in 5 to 7 hours. It accepts 110 to 240 voltage.
The Foldable Stand for LED Tube Lights supports Astera AX1, FP1, and FP2 tubes in a vertical position, very close to the floor, for low-angle shooting. The three legs nest together into a compact form for space-efficient packing.
An essential accessory for mounting on Super Clamps or any piece of grip gear with female threads, the Baby Pin Double-Ended Spigot from Astera has 1/4"-20 threads at one end and 3/8"-16 threads at the other for mounting onto clamping gear and support lights with a 5/8" receiver. The stainless steel pin is 2.7" long and compatible with the AX3 bracket, AX3 housing, AX5 bracket, AX1 Holder, AX1 Wing Plate, and more.
This M5 Eyebolt for Ax1 Pixel, Helios, Titan and Hyperion Tubes from Astera screw into the tube and allow it to be suspended without a frame. They can also be used for suspending four tubes via safety wire.
This Metal Holder for Mounting Astera Tubes is used to mount FP1, FP2, and FP3 tubes to walls, truss and other structures. They can can also be secured with spax screws.
Store, transport, protect, and charge up to eight AX1 PixelTubes at once in this black Astera AX1 Wheeled Charging Case. The case features an interior divider, two handles, and a latch closure.