This Triad-Orbit SM-SW1 Modular Speaker Hanging Solution Kit from B&H is designed for cloud drop hanging a Genelec One Series, Genelec 8030, or smaller Genelec powered speaker on a ceiling or extending it off a wall. The kit includes an SM-SW1 speaker mount swivel to securely position the speaker, two SM-PM1 cloud drop pipe mounting plates, an SM-WM1 slide-in wall mounting plate, and an SM-GP mounting plate for Genelec speakers. Pre-adjust pan at 30° increments and tilt at 15° increments.
The Triad-Orbit SM-PM1 is a mounting plate with a 3/4" threaded hole that accommodates a standard 3/4" NTS pipe, making it ideal for cloud drop hanging speakers or extending them off of walls. It can either slide into the Triad-Orbit SM-WM1 wall plate or screw into the SM-SW1 swivel (SM-WM1 and SM-SW1 available separately).
The Triad-Orbit SM-SW1 is the main pan and tilt swivel designed for Triad-Orbit's SM-1 Dolby Atmos speaker wall-mounting system. It can connect directly to speakers with a 50 to 80mm dual hole pattern or accept the versatile array of Triad-Orbit's speaker mounting plates. The SM-SW1 features 180° of tilt—90° forward and 90° back—adjustable in 15° increments. The locking spring pin and tension knobs keep the SM-SW1 securely held in the desired position.
- Accommodates speaker mounting plates in the Triad-Orbit Precision AV Atmos Speaker Mount System series
- Connects directly to speakers that have a dual hole pattern (50 to 80mm)
- Spring pins in 15° increments
- Secondary tension locks in both tilt and pan axis
The Triad-Orbit SM-WM1 is a slide-in plate for wall- or ceiling-mount Dolby Atmos speaker setups using Triad-Orbit's SM-SW1 swivel or SM-PM1 pipe mounting plate, either of which easily slides into the SM-WM1 and secures with hex screws. The SM-WM1 can be screwed into a wall or ceiling and greatly simplifies installation of speaker systems.
- Accepts the Triad-Orbit SM-SW1 swivel or the SM-PM1 pipe mounting plate
- SM-SW1 or SM-PM1 (both available separately) slides into the SM-WM1 mount and secures by four hex screws
- Allows a speaker to be attached to an SM-SW1 swivel before the assembly is slid in the SM-WM1 mounting plate
- For use with Triad-Orbit Precision AV Atmos Speaker Mount System hardware
The Triad-Orbit SM-GP is a speaker mounting plate designed for attaching a Genelec One Series or smaller Genelec studio monitor to a Triad-Orbit SM-SW1 swivel (available separately) in Dolby Atmos speaker setups. It features four holes with 127 x 70mm spacing, four holes with 108 x 51mm spacing, and easy installation—attach it to the SM-SW1, then slide the assembly into an SM-WM1 wall/ceiling mount (available separately).