Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Video Chat with a Pro Video Expert - Live
Key Features
- Reduce Shake of Mounted Camera/Gear
- Metal Vibration Mount & Rubber Washers
- Universal Camera Plate
- 22 lb Maximum Payload
Reduce shake and vibration when performing PTZ camera moves with this Vibration Reduction Mount with Universal Plate from PTZCam. The mounting kit features a vibration reduction mount and a universal mounting plate for a PTZ camera or other gear such as a projector, encoder, or switcher. The plate has a maximum load capacity of 22 lb.
More DetailsIn Stock
Protect Your Gear
Add a protection plan from $9.99
See Options
See any errors on this page?
Is it better to put the isolation between the ...
Is it better to put the isolation between the wall and the camera mount or between the wall Mount and the camera? Which will work better?
There is no standard to wall mounting vibration mounts. However, The vibration mount may cause even more camera movement if mounted to the wall and then the camera mount.
Date published: 2024-11-08
Would this work with a large Sony BRC-H900 PTZ ...
Would this work with a large Sony BRC-H900 PTZ camera? I cannot tell the size of this?
The PTZCam Vibration Reduction Mount with Universal Plate for PTZ Cameras is compatible with the Sony BRC-H900 1/2" HD 3CMOS Remote PTZ Camera.
Date published: 2023-01-29
Will this work with a tripod mounted DSLR camera?
Will this work with a tripod mounted DSLR camera?
Yes, you would be able to use the PTZCam Vibration Reduction Mount with Universal Plate for PTZ Cameras on a tripod with a DSLR camera.
Date published: 2026-05-19
Will this work with both PIXELab IFW45WM - ...
Will this work with both PIXELab IFW45WM - Outdoor Long Range optical Zoom Camera & PIXELab IPW42W - Outdoor Wide Lens 180 degree Camera?
This is a universal mount and it works with a wide range of PTZ camera models. Your security camera should be able to mount to this mount however it is not really designed for cameras like the PIXELab IFW45WM.
Date published: 2022-11-07
Will this work out of the box with a Bescor ...
Will this work out of the box with a Bescor MP-101 motorhead?
The PTZCam Vibration Reduction Mount with Universal Plate for PTZ Cameras, can be mounted to the Bescor MP-1AC. However, the efficacy is unknown because it depends on the camera and where and what you are doing.
Date published: 2021-08-10
What are the dimensions of the mount itself?
What are the dimensions of the mount itself?
108 x 108 x 56mm / 4.25 x 4.25 x 2.2"
Date published: 2026-06-18
Will this work with a Marshall CV620 ?
Will this work with a Marshall CV620 ?
The Marshall Electronics CV620 will mount on this plate. Whether it will work depends on where you are mounting it and the severity of the vibrations. You may wish to contact us directly via phone, email or Live Chat.
Date published: 2021-04-30
Will this work inverted? With the camera hanging ...
Will this work inverted? With the camera hanging off the bottom?
Yes, as this is designed to also work for projectors and these are almost always mounted on an inverted setup.
Date published: 2022-07-21