Video Chat with a Photography Expert - Live

Benro Induro Hydra 2 Waterproof Carbon Fiber Series #2 Tripod

BH #BEHYDRA2 • MFR #HYDRA2
Print
Benro Induro Hydra 2 Waterproof Carbon Fiber Series #2 Tripod
Key Features
  • Load Capacity: 37.5 lb
  • Maximum Height: 60"
  • Max Height without Center Column: 50"
  • Minimum Height: 13.2"
The Induro Hydra 2 Waterproof Carbon Fiber Series #2 Tripod from Benro Is an innovative waterproof travel tripod that caters to adventurous outdoor photographers needing a rugged all-weather support system for their camera gear. With a reverse-folding design, the Hydra2 folds down to an impressive 16.7 inches, yet it reaches a maximum height of 60.2 inches with the center column extended. A unique carbon fiber weave maximizes the strength-to-weight ratio while it's waterproof leg locks and feet make this tripod ready for the harshest of elements. It features five-section legs that support a maximum load of 37.5 lb. The metal twist locks are waterproof and dust resistant and are also oversized so there's no need to remove your gloves when the cold weather hits.

More Details
In Stock
No Store Display
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $32.99
Ask an Expert
800-606-6969

Benro Hydra 2 Overview

The Induro Hydra 2 Waterproof Carbon Fiber Series #2 Tripod from Benro Is an innovative waterproof travel tripod that caters to adventurous outdoor photographers needing a rugged all-weather support system for their camera gear. With a reverse-folding design, the Hydra2 folds down to an impressive 16.7 inches, yet it reaches a maximum height of 60.2 inches with the center column extended. A unique carbon fiber weave maximizes the strength-to-weight ratio while it's waterproof leg locks and feet make this tripod ready for the harshest of elements. It features five-section legs that support a maximum load of 37.5 lb. The metal twist locks are waterproof and dust resistant and are also oversized so there's no need to remove your gloves when the cold weather hits.

Engineered for stability at any angle with three-stop adjustable leg locks, and independent leg spread, provides lower angles and maximum stability. The built-in bubble level helps maintain a level shot, while the attached ballast hook helps maximize your tripod's stability. The CNC-machined oversized center column locking collar makes it easy to secure the center column in any vertical position.

  • Waterproof twist-lock joints
  • Oversized CNC-machined center column locking collar
  • Included, concealed Hex wrenches for adjusting leg tension, set screw, and accessory screw
  • Three-stop adjustable leg locks
  • Independent leg spread
  • Ballast hook
  • Bubble level
  • Benro Hydra 2 Specs

    Key Specs
    Head Mount Type
    1/4"-20 or 3/8"-16 Male
    Primary Material
    Carbon Fiber
    Load Capacity
    37.5 lb / 17 kg
    Maximum Working Height
    60.2" / 153 cm
    Max Height with Center Column Down
    50.0" / 127 cm
    Minimum Working Height
    13.2" / 33.6 cm
    Closed Length
    16.7" / 42.4 cm
    Weight
    3.31 lb / 1.5 kg
    Legs
    Head Mount Type
    1/4"-20 or 3/8"-16 Male
    Primary Material
    Carbon Fiber
    Leg Lock
    Twist Lock
    Leg Sections
    5
    Independent Leg Spread
    Yes
    Leg Positions
    3 Positions
    Foot Features
    Removable
    General
    Load Capacity
    37.5 lb / 17 kg
    Maximum Working Height
    60.2" / 153 cm
    Center Column
    Yes (Round): Ballast Hook
    Max Height with Center Column Down
    50.0" / 127 cm
    Minimum Working Height
    13.2" / 33.6 cm
    Closed Length
    16.7" / 42.4 cm
    Bubble Level
    Yes
    Weight
    3.31 lb / 1.5 kg
    Packaging Info
    Package Weight
    5.52 lb
    Box Dimensions (LxWxH)
    18.7 x 6.3 x 3.7"

    Benro Hydra 2 Reviews

    Regarding those stiff twist locks...

    By Paul
    Rated 5 out of 5
    Date: 2024-11-04

    This is a fantastic product, but one must understand how it is different to fully appreciate it. It's a tripod wearing fishing waders: that is to say, it's waterproof up to, but not over, the top of the carbon fiber legs. And each twist lock is a watertight seal, not just an expansion lock, so a couple of things come into play: 1. The legs don't drop free when the locks are loosened. 2. The seals are rubber against carbon fiber, and deserve a little maintenance.  The unit I received had some VERY stiff locks, but upon inspection it was clear that the O-rings were just dry. A thorough coat of silicone grease (consult your local diving store or online soulless megacorporation) on all 12 of them, and some twist/untwists to spread it evenly around, and it's an ENTIRELY different experience. When properly lubricated, this thing feels as high-quality as it looks.  I will also note that the O-rings, if too dry, can catch on the tubing and ride up the leg, rendering the seal ineffective. This is easy to spot if you know what you're looking for, and just as easy to fix by rolling it back into place. All in all, though it lacks some of the more modern amenities such as the ability to remove the center column but keep the spider mounted, it has a feast of practical touches that make its setup and use a joy. Each of the three wrenches needed for this beast is not only included, but built in to the tripod — you *can't* be without them. The bag comes with an INNER bag, as if to say Yep, we get that this thing is likely to be covered in seaweed and sand, so let's not get everything else in here messy until you can wash it off, eh?. And it comes with a set of spiked stainless steel feet, which seems like it should be the default for a tripod made for standing in water, but so often these are a hefty extra charge. Five stars. No other notes. Completely happy.

    Like it.

    By Dennis
    Rated 5 out of 5
    Date: 2024-03-19

    I used this tripod in a murky, swampy river of central Florida. I attached a nice swivel head to hold a Z8 with 70-180 lens. Seemed sturdy to me. Water did enter each of the 3 legs. I removed the bottom leg plugs and used a hose & nozzle to flush the legs for a good cleaning. Nice to know it is carbon fiber so it will not rust. Keith

    See any errors on this page?

    Can you spread legs to wide setting?

    Can you spread legs to wide setting?
    Asked by: Joel
    The minimum working height of the Benro Induro Hydra 2 Waterproof Carbon Fiber Series #2 Tripod is 13.2" / 33.6 cm. The legs can't be spread farther to lower the tripod.
    Answered by: Elliot
    Date published: 2025-01-03

    Is the center column on the Hydra 2 tripod ...

    Is the center column on the Hydra 2 tripod removable?
    Asked by: Robert
    Yes, the Benro Induro Hydra 2 Waterproof Carbon Fiber Series #2 Tripod center column can be removed and inverted for low level shooting.
    Answered by: Yaakov
    Date published: 2024-03-28

    What is the diameter of the center column?

    What is the diameter of the center column?
    Asked by: Tim
    The diameter of the center column on the Benro Induro Hydra 2 Waterproof Carbon Fiber Series #2 Tripod is 29mm. The base mount is 56mm wide.
    Answered by: Llinelva D
    Date published: 2024-06-11
    • y_2026, m_6, d_6, h_12CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_3
    • loc_en_US, sid_1646169, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
    • clientName_bhphotovideo
    Whatever You Need, We've Got It