Video Chat with a Pro Audio Expert - Live

Radial Engineering Relay Xo Output Switcher and JR1M Remote Momentary Footswitch Kit

BH #RABABWSRMSK (B&H Kit)
Print
Radial Engineering Relay Xo Output Switcher and JR1M Remote Momentary Footswitch Kit
Key Features
  • Switch Mic Between PA and Monitors/Crew
  • 1 XLR Mic/Line Input to 2 XLR Outputs
  • 14-Gauge Steel Chassis with I-Beam
  • Active or Passive Footswitch Modes
An ideal B&H Kit for vocalists or performers looking for a convenient, foot operated mic output switcher, the Radial Engineering Relay Xo Output Switcher and JR1M Remote Momentary Footswitch Kit delivers efficient operation on any stage or in any rehearsal space. This setup includes a balanced audio output switcher for routing the output of a microphone to two different audio outputs, and a momentary remote footswitch for selecting A or B outputs when the switch is held down. This makes it simple for a vocalist to switch their mic between the main PA system and the monitors for discreet communication, or send their microphone output to two channels for easy access to both dry and wet signal chains.
More Details
In Stock
No Store Display
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $35.99
Ask an Expert
800-606-6969
Kit Contains:

An ideal B&H Kit for vocalists or performers looking for a convenient, foot operated mic output switcher, the Radial Engineering Relay Xo Output Switcher and JR1M Remote Momentary Footswitch Kit delivers efficient operation on any stage or in any rehearsal space. This setup includes a balanced audio output switcher for routing the output of a microphone to two different audio outputs, and a momentary remote footswitch for selecting A or B outputs when the switch is held down. This makes it simple for a vocalist to switch their mic between the main PA system and the monitors for discreet communication, or send their microphone output to two channels for easy access to both dry and wet signal chains.

Radial Engineering Relay Xo Output Switcher with Remote Input

The Radial Engineering Relay Xo Balanced Remote AB Switcher is a balanced audio switcher with one XLR input and two XLR outputs designed to route the output of a microphone to two different audio inputs. This enables a vocalist to switch his mic between the main PA system and the monitors for discreet communication, especially important for artists that employ in-ear monitors. You can also use the Relay Xo to send the output of a microphone to two channels on the PA. The first channel could be set dry to speak to the audience between sets, while the second channel could be set wet with reverb and echo to enhance the voice. This enables the vocalist to control effects and deliver a more professional performance.

The Relay Xo features a balanced XLR input and two balanced XLR outputs. The audio signal path is a passive wire with no transformers or electronic buffers inside that could introduce distortion or color the tone. The unit employs military-grade, gold-contact sealed relays to do the switching, making it suitable for both mic- and line-level signals. Switching may be done using the side-access pushbutton switch or by remote control via the XLR-1/4" combo jack, using either the Radial JR1-L latching or JR1-M momentary footswitch (not included). A remote link enables multiple units to be used in tandem.

Switches vocal microphone from PA to intercom
Allows artist to speak with musicians and techs
Remote control using footswitch, MIDI contact closures, or the Radial JR1 (not included)
Routes any balanced signal to two destinations
Locking XLR-1/4" combo jack used to connect a remote switch
Features remote link capabilities to link the switching of additional Relay Xo units
Supports stereo and multichannel switching systems
Balanced XLR input
Signal path is a passive copper wire that ensures audio signals pass-through without any change or added noise or distortion
Output select switch toggles the Relay Xo's outputs
Two LED indicators display which output is active
Ground lift disconnects pin-1 (ground) on the input XLR jack to help reduce hum and buzz caused by ground loops
Features heavy-duty, glass-filled XLRs with nickel-silver contacts
Military-grade relays are used to switch the audio signal and provide a straight wire signal path
Discrete full-size, hand inserted parts ensure the audio signal flows without impediment from input to output without distortion or artifact
Double-sided military spec for greater durability and full ground plane to reduce radio-frequency interference
Book-end design creates a protective zone around the jacks and switches
Switches feature metal outer casing are rated at over 20000 cycles for durability
Features a cable clamp to prevent accidental power disconnection by locking down the AC adapter cable
Full-bottom no-slip pad provides electrical isolation and holds the Relay Xo in one place
I-beam enclosure eliminates cold solder joints from developing
Powder coat finish
UPC: 676101041312
Radial Engineering JR1M - Remote Momentary Footswitch

The JR1M from Radial is a momentary footswitch that can control various Radial devices, such as the Relay Xo stereo switcher, and is designed to remotely control functions such as switching between A and B outputs. When used for this purpose and set to active mode, the footswitch derives power from the device under control, thus eliminating the need for a local power supply or batteries.

The footswitch can also function in passive mode, allowing it to function as a standard footswitch for any device with a compatible 1/4" footswitch jack. The momentary footswitch changes states only when held down and subsequently released and is a well suited for 'push-to-talk' uses like toggling to an intercom system to speak with stage technicians.

UPC: 676101041350
Kopul Premium Performance 3000 Series 1/4" Male to 1/4" Male Instrument Cable (10')

The 10' Premium Performance 3000 Series 1/4" Male to 1/4" Male Instrument Cable from Kopul is designed for connecting guitars to amplifiers or any other application where a 1/4" instrument or unbalanced line-level connection is required. It can be used in applications for live stage, theater, rehearsals, recordings, and more.

Kopul's 3000 Series instrument cables are engineered for protection against electromagnetic interference (EMI), radio frequency interference (RFI), and the significant reduction of static noise. This cable features gold-plated 1/4" connectors that have a metal shell and chuck-style strain relief.The 24-gauge annealed-copper conductors with dense spiral copper shielding, as well as a conductive PVC, and PE insulation make the Premium Performance 3000 Series instrument cable a flexible, quiet cable that ensures excellent transfer of the audio signal.

Protection Against Interference
Dense spiral copper shielding with 95% coverage provides protection against electromagnetic and radio frequency interference as well as static noise
24-AWG Copper Conductor
The 24-gauge annealed copper provides excellent signal conductivity
PVC Shield and PE Insulation
The conductive PVC shield and PE insulation deliver additional protection against EM and RF interference and ensure that noise does not compromise your signal
Gold-Plated Connectors
Gold-plated 1/4ʺ male connectors ensure reliable signal transfer
Flexible
A PVC jacket offers protection for the cable while maintaining its flexibility
Chuck-Style Strain Relief
Chuck-style strain relief offers a secure connection between the connector and the cable
UPC: 847628590762
Kit Contains:

Radial Engineering Relay Xo Output Switcher with Remote Input

Audio Circuit Type
Remotely Controlled Mechanical Relay
Frequency Response
10 Hz to 100 kHz
Total Harmonic Distortion
<0.0005%
Dynamic Range
>140 dB
I/O Impedance
Source Dependent
Common Mode Rejection
-106 dB
Maximum Input
26 dBu
Phase Shift
<1° at All Frequencies
Gain
0 dB
Noise Floor
-115 dBu
Intermodulation Distortion
0.001%
Switches
A/B Switch, Ground Lift
Ground Lift
XLR Output B Only
Audio Connectors
XLR-F Input, 2 x XLR-M Outputs
XLR Configuration
AES Standard Pin-1 Ground, Pin-2 (+), Pin-3 (-)
Remote Connection
Combo XLR-1/4", 1/4" Loop-Through
Contact Closure
With 1/4" TRS Jack, Short Tip and Ground to Switch
With XLR, Short Pin-1 Ground and Pin-2 Hot to Switch
Construction
14 Gauge Steel with Internal I-Beam
Power
15 VDC, 30 mA, Center-Pin (+)
Operating Conditions
For Use in Dry Locations Only between 41 to 104°F / 5 to 40°C
Dimensions
5 x 3.3 x 1.8" / 12.7 x 8.4 x 4.5 cm
Weight
1.4 lb / 0.6 kg
Packaging Info
Package Weight
2.35 lb
Box Dimensions (LxWxH)
11.8 x 4.95 x 2.7"

Radial Engineering R800 8030 Reviews

See any errors on this page?
Whatever You Need, We've Got It