Video Chat with a Pro Audio Expert - Live

Kali Audio WS-6.2 6" 400W Studio Subwoofer

BH #KAWA62 • MFR #WS-6.2
Print
Kali Audio WS-6.2 6" 400W Studio Subwoofer
Key Features
  • 2 x 6.5" High-Excursion Woofers
  • Class-D Amp, 400W RMS, 1000W Peak
  • 27 to 200 Hz Frequency Response
  • Compact Form Factor
Offering a compact yet powerful subwoofer for any project studio or home entertainment system, the WS-6.2 from Kali Audio is a ported 400W RMS sub with a class-D amp and dual 6.5" drivers for potent sound reproduction. The WS-6.2 supports stereo and multichannel setups, up to 5.1 systems in small rooms, and the smaller than typical form factor enables a greater variety of options for room placement.
More Details
Temporarily Out of Stock
No Store Display
Free 2-Day Shipping
Ask an Expert
800-606-6969

Kali Audio WS-6.2 Overview

Offering a compact yet powerful subwoofer for any project studio or home entertainment system, the WS-6.2 from Kali Audio is a ported 400W RMS sub with a class-D amp and dual 6.5" drivers for potent sound reproduction. The WS-6.2 supports stereo and multichannel setups, up to 5.1 systems in small rooms, and the smaller than typical form factor enables a greater variety of options for room placement.

The WS-6.2 sports a wide 27 to 200 Hz frequency response, effective for low-passed signals, LFE channels, or external crossovers, and onboard 80 or 120 Hz crossovers are available for use on a range of different speaker setups. Plenty of connection options are available, including combo XLR-1/4" inputs, RCA inputs, and XLR outputs for full-range speakers, and this active subwoofer includes an AC power cord to get you started.

Dual 6.5" Woofers
The WS-6.2 subwoofer uses two horizontally opposed 6.5" woofers as its driver configuration. Not only does this allow for high output in a small form factor, it also eliminates net vibration, so the subwoofer will not scoot along the floor at high levels. Kali designed these woofers for high excursion, with 15mm travel from peak-to-peak.
Low-Noise Port Tube
Similar to the LP-Series studio monitors, the port tube on the WS-6.2 was designed to deliver all the benefits of a front-firing port tube, without any drawbacks associated with noise. This allows the WS-6.2 to have even lower bass extension, while delivering clean, tight, and punchy bass.
Footswitch Bypass
Turn off the subwoofer and listen to your mix through your full-range speakers, so you can hear how it will translate to systems that don't have a sub. Footswitch sold separately; most music retailers sell a variety of 1/4" footswitches that will work well.
Limiter Circuit
The WS-6.2 is equipped with a limiter circuit that will protect the speaker from unsafe operating levels. In other words, you don't need to worry about blowing up the subwoofer by playing it too loud.
Small Form Factor
The MDF and vinyl enclosure of the WS-6.2 is less than half the volume of other subwoofers with similar output and bandwidth specs. This allows a variety of placement options that aren't possible with a larger sub.
UPC: 860006446895

Kali Audio WS-6.2 Specs

Key Specs
Monitor Type & Configuration
Active Dual Subwoofer
Total Power Output
400 W RMS / 1000 W Peak
Subwoofer Drivers
2x 6.5" / 16.5 cm Cone
Frequency Range
31.5 Hz to 180 Hz ± 3 dB
Audio I/O
2x Combo XLR-1/4" TRS Balanced Mic/Line Input
1x Stereo 2RCA Unbalanced Line Input
1x 1/4" TRS Balanced Line Input
2x XLR 3-Pin Balanced Line Output
Digital Audio I/O
No
Network I/O
No
Wireless
No
Monitor Type & Configuration
Active Dual Subwoofer
Number of Included Monitors
Single Monitor
Enclosure
Bass-Reflex/Ported
Total Power Output
400 W RMS / 1000 W Peak
Drivers
Subwoofer
2x 6.5" / 16.5 cm Cone
Amplifiers
Subwoofer: 400 W RMS / 1000 W Peak Class-D
Performance
Frequency Range
31.5 Hz to 180 Hz ± 3 dB
Frequency Response
27 Hz to 200 Hz ± 10 dB
Maximum Sound Pressure Level (SPL)
120 dB (Peak)
Dynamic Range
20 dB
Total Harmonic Distortion (THD)
<2%
Protections and Limiting
Limiter
Signal Processing
EQ
No
Filters
No
Crossover Frequency
High-Pass: 80 Hz
Low-Pass: 120 Hz
Phase Adjustment
0 / 180° Phase Inversion
Connectivity
Audio I/O
2x Combo XLR-1/4" TRS Balanced Mic/Line Input
1x Stereo 2RCA Unbalanced Line Input
1x 1/4" TRS Balanced Line Input
2x XLR 3-Pin Balanced Line Output
Digital Audio I/O
No
Network I/O
No
USB
No
Wireless
No
Mobile App Compatible
No
Power
AC Input Power
100 to 240 VAC, 50/60 Hz
Power Consumption
240 W (Maximum)
Physical
Color
Black
Monitor Orientation
Vertical
Enclosure Material
MDF
Mounting Points
No
Dimensions (W x H x D)
12.2 x 14.5 x 11" / 31 x 36.8 x 27.9 cm
Weight
31.0 lb / 14.1 kg
Packaging Info
Package Weight
38.42 lb
Box Dimensions (LxWxH)
19.7 x 16.2 x 14.5"

Kali Audio WS-6.2 Reviews

Kali Audio WS-6.2 6" 400W Studio Subwoofer

By Marc
Rated 5 out of 5
Date: 2026-02-05

Works Excellent.Love it.

Uber Bass

By David
Rated 5 out of 5
Date: 2023-08-12

I bought this for a desktop computer setup after hearing great things about Kali Studio Monitors. I had the Kali Audio IN-5 monitor spears for several months. Now that I have the subwoofer the experience is even better! I'm using a headphone jack to RCA connecting the subwoofer to my motherboard (PC). Then use XLR cables to connect to my Speakers. The bass for gaming is incredible. Optional foot pedal switch input that lets you turn it off easily when you want to be stealthy.

See any errors on this page?
Whatever You Need, We've Got It