Furman 6-Channel Power Distributor

BH #FUASD120 • MFR #ASD-120
Print
Furman 6-Channel Power Distributor
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Furman ASD-120 Overview

From Manufacturer

The Furman ASD-120 AC Sequenced Power Distro is an extremely compact, low-cost rackmount power-distribution system that is ideal for mobile PA systems, touring musical and theatrical acts, mobile recording facilities, on-location film and video shoots, and more. It is ideal for any situation where AC power must be distributed to multiple circuits and a hard-wired, built-in system is missing, inadequate, or impractical.

The ASD-120 allows for six circuits to be powered up in a sequenced fashion, and the sequence is reversed for power down. The delay interval is user-adjustable via an internal trim pot. The front panel provides a three-position switch for each circuit that allows each circuit to be part of the power-up/down sequence, or to remain on or off apart from the sequence. An LED indicates when either the power-up or power-down sequence is in progress. The sequence can be initiated with either momentary or maintained switches, locally or remotely. A duplex outlet is provided for each delay step.

The ASD-120 can handle up to 120 amps of incoming power, distributing it to six 20-amp, 120V circuits. Each circuit has a front-panel status indicator that lights up when it is turned on, and a 20-amp duplex outlet on the rear panel.
Since the sequence control signals are also available on the rear panel, one or more ASD-120s may be installed in remote locations and operated via low-voltage control wiring. The sequence-control signals can also drive PowerPorts, MiniPorts, PS-PRO and PS-8-R Power Sequencers, or any other circuits that need to know when their particular time delay has elapsed. Using one or more ASD-120's can provide the capability of controlling power and power sequencing for an entire system.
This unit incorporates four oversized busses, allowing wiring for 120V or 240V single-phase, or 208V three-phase power. A strain relief clamp is provided that can accommodate a cable or wire bundle up to 1.5" in diameter. Cable termination is a simple process of breaking out and stripping the individual conductors and connecting them with set screws, and then tightening the strain relief clamp.
Spike-Clamping Voltage: TVSS rating 400V peak, L-N, N-G, L-G (tested to UL 1449)
Six widely spaced duplex outlets on rear panel
A locking switch with a removable key is provided for maximum security.
Steel chassis, zinc-chromate plating; .125" brushed and black anodized-aluminum front panel.

Furman ASD-120 Specs

Input
Input Current: 120 A
Input Voltage: 120/240 V single phase, or 208 V 3-phase
Output
Six identical 20 A, 120 V circuits
Output Current
Current on 12V supply limited to 60 mA max
Surge Energy Rating
Maximum Surge Current: 6500 A
Maximum Spike Energy: 80 joules per circuit
Audible Alarm
No
Compatibility
19" rack
Environmental Requirements
None listed
Agency Certifications
ETL/CETL listed
Dimensions
3.5 x 19 x 9.6" (8.9 x 48.3 x 24.4 cm)
Weight
20 lb (9.1 kg)
Equipment Protection
None
Packaging Info
Package Weight
15 lb
Box Dimensions (LxWxH)
23.5 x 16.5 x 6.7"

Furman ASD-120 Reviews

See any errors on this page?
Whatever You Need, We've Got It