Record improved audio with your USB-C compatible mobile device using the WES2 2-Person Wireless Microphone System from Godox. The system includes two clip-on transmitters with built-in omnidirectional microphones and a dual-channel plug-in receiver with male USB-C connector. Advanced noise reduction with two selectable modes on each transmitter mitigate negative effects from sudden outdoor noises. The system also includes a USB-A to USB-C data cable, two furry windscreens, and a charging case to replenish the components.
Compact Components, Plug-In Receiver
Simply plug your dual-channel receiver into your compatible mobile device of choice using the built-in male USB-C connector. The receiver weighs only 0.2 oz while the transmitters weigh only 0.4 oz each. All components also feature a female USB-C port, which can be used for charging or data delivery.
Clip-On Transmitters with Advanced Noise Reduction
Integrated omnidirectional microphones on the transmitters capture crisp audio in your next 2-person vlog or livestream. Onboard controls can toggle the advanced noise reduction. Use the iOS/Android mobile app to control the two different modes—either weak or strong—depending on your noise environment. The transmitters can capture audio with a 48 kHz/16-bit sampling rate and a maximum 110 SPL.
656.2' Transmission Distance
All the components of the WES2 system can communicate to one another from up to 656.2' away via line-of-sight 2.4 GHz technology. This transmission is resistant from interference and has a high gain.
Mobile App Control, Plug-and-Play Setup
Simply plug your receiver into your mobile device and start up the Godox mobile app to start recording. The app allows you to playback your record audio or control advanced settings like transmitter volume and noise reduction. The USB-C port on the receiver also allows you to charge your mobile device while you record.
Long Battery Life
The transmitter units feature a built-in 140mAh battery with an 8-hour runtime. Recharge the components via USB-C port or use the included charging case. The charging case stores all components together and recharges the transmitters in just 2 hours. Thanks to its 1400mAh battery, the case can recharge the system two times on a single charge. The receiver runs on plug-in power from your connected device.
EAN: 6952344232163