Video Chat with a Pro Audio Expert - Live

Behringer DI4000 V2 Rackmountable 4-Channel Active Direct Box

BH #BEDI4000V2 • MFR #0809-AAN86-US1
Print
Behringer DI4000 V2 Rackmountable 4-Channel Active Direct Box
Key Features
  • 4-Channel Rack DI-Box for Stage & Studio
  • XLR & 1/4" Inputs, Balanced XLR Outputs
  • 1/4" Link Outputs
  • 40 dB Input Attenuation, +20 dB Gain
The Behringer DI4000 V2 is an active direct injection (DI) box that packs four channels into a 1 RU rackspace. Equally suited for both studio use and live applications, this versatile DI-box provides impedance and signal matching for the direct connection of unbalanced line and instruments signals (from guitars, basses, keyboards, effect processors, and other line-level devices) to mixers and amplifiers. The unit operates on mains power.
More Details
In Stock
No Store Display
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $24.99
Ask an Expert
800-606-6969

Behringer DI4000 Overview

The Behringer DI4000 V2 is an active direct injection (DI) box that packs four channels into a 1 RU rackspace. Equally suited for both studio use and live applications, this versatile DI-box provides impedance and signal matching for the direct connection of unbalanced line and instruments signals (from guitars, basses, keyboards, effect processors, and other line-level devices) to mixers and amplifiers. The unit operates on mains power.

On the back panel, each channel is equipped with two unbalanced inputs (XLR and 1/4" TS) and an unbalanced 1/4" TS link output (wired in parallel with the main output) to connect to your amp or monitor console. The channels also feature individual input attenuation switches to increase the operating range of the unit from the low-level signals of a high-impedance guitar to the hot speaker terminals of a PA amplifier.

On the front panel, each channel has its own balanced XLR output to connect individual signals to the main mixing board. Channels also feature an individual ground-lift switch, phase-reverse switch, high-cut filter switch, and +20 dB gain switch.

The The DI4000 V2 is equipped with illuminated switches that enable easy operation in dark environments. Accurate, 8-segment LED level meters let you see levels at a glance for each individual channel.

The unit uses Behringer OT-1 transformers to deliver an ultra-flat frequency response for pristine audio.

A Versatile Set of Tools for the Studio or Stage
  • Switchable input attenuation allows input levels of up to +40 dB
  • +20 dB gain switch for pre-amplification of low-level output signals
  • Phase-reverse switch allows you to instantly correct phase problems
  • Switchable high-cut filter (8 kHz) for guitar applications
  • Ground-lift switch eliminates typical ground-loop problems
  • Allows direct connection to speaker outputs with up to 3000W
  • Accurate 8-segment LED level meter for optimum performance
  • 1/4" TRS and gold-plated XLR connectors
  • Illuminated switches enable operation in dark environments
  • Internal switch-mode power supply (100-240 VAC) for noise-free audio and low power consumption
  • Ultra-flat frequency response due to Behringer OT-1 transformers
UPC: 653341312839

Behringer DI4000 Specs

General
Item Type
Rackmount DI
Number of Channels
4-Channel
Active/Passive
Active
Circuitry
Solid-State
Preamp
Pad
-20 / -20 dB
Ground Lift
Yes
Polarity Reverse
Yes
Gain/Trim Range
+20 dB
EQ & Tone Shaping
High-Cut/Low-Pass Filter
8 kHz
Low-Cut/High-Pass Filter
No
Connectivity
Audio I/O
4x XLR 3-Pin Unbalanced Input
4x 1/4" TS Unbalanced Input
4x 1/4" TS Unbalanced Thru
4x XLR 3-Pin Balanced Output
Performance
Frequency Response
23 Hz to 60 kHz ±3 dB (100 Kilohms Load)
23 Hz to 40 kHz ±3 dB (600 Ohms Load)
23 Hz to 8 kHz (With High Cut)
Maximum Input Level
+60 dBu
Input Impedance
220 Ohms (Pad Out)
Output Impedance
600 Ohms
Total Harmonic Distortion/Noise
< 0.01% (at 1 kHz, +20 dBu)
Signal-to-Noise Ratio
-90 dBu (22 Hz to 22 kHz)
Power
Operating Voltage
AC Input
AC Input Power
100 to 240 VAC, 50 / 60 Hz
Physical
Rackmount Size
1 U
Dimensions
19 x 5.4 x 1.7" / 483 x 136 x 44 mm
Weight
4.6 lb / 2.1 kg
Packaging Info
Package Weight
5.5 lb
Box Dimensions (LxWxH)
20.5 x 9.8 x 4.1"

Behringer DI4000 Reviews

See any errors on this page?
Whatever You Need, We've Got It