Create the ideal video monitoring setup for a Steadicam stabilizer with this Transvideo 8" CineMonitor Bundle from Steadicam. The bundle includes a Transvideo 8" CineMonitor HD X-SBL monitor with 2500 cd/m² brightness, a 36" 12V 5- to 8-pin LEMO power cable, a 24" BNC video cable, and a custom mounting kit compatible with the Steadicam universal monitor bracket.
The 8" CineMonitor HD X-SBL Video Monitor from Transvideo supports video at resolutions up to 1920 x 1080. It features X-SBL technology for an eXtreme SuperBright anti-glare bonded screen, up to 2500 cd/m². 85° viewing angles are supported. This monitor has SDI and component video ports, as well as RS-232, RS-232/RS-422, and GPI ports for remote connection. There is a 4-pin XLR input for power as well as a Gold Mount/V-mount compatible battery back. This monitor includes two shoulder strap pins, a bottom slide, a 3.3' 4.5 GHz HDTV BNC cable, a USB adapter for SW updates, a screen protective cover, a microfiber cloth and bag, and a hard case with custom shaped foam.
Add a monitor to your video rig with the Monitor Mounting Kit for Transvideo Cinemonitor 8" by Steadicam. This mounting kit is for use with the Transvideo Cinemonitor 8". The mount attaches to the SmallHD 703 monitor. Mounting blocks are not required to fasten the unit.
Power your field monitor from your M-series stabilizer base with the Steadicam 12V 5-Pin LEMO to 8-Pin LEMO Cable. The 1B.305 5-pin LEMO end connects to the monitor port on the base of the Steadicam M-1 or M-2. The 1B.308 8-pin LEMO end connects to the power input of a compatible monitor. The cable includes a tally sensor to send your camera's on-air status to your monitor.
Connect your camera to your sled with this BNC Video Cable from Steadicam. This cable features BNC male connectors on each end and allows you to connect your camera to a Steadicam Ultra2c, Ultra 2, Ultra, Phantom, or Clipper 312.