Godox Air Soft Tube for ML100Bi & ML100R

Yes, the Godox Air Soft Tube for the KNOWLED TP4R Tube Light uses the standard T12 size clamp, so it can be used with most tube lights and has no issue mounting inside the softbox.

The Godox Air Soft Tube for KNOWLED TP4R Tube Light has the same circumference as the Godox TL120 RGB LED Tube Light (4') and would be a compatible diffuser.

The Godox Air Soft Tube for KNOWLED TP2R Tube Light, BH #GOTPS2A, is incompatible with the Godox TL30 RGB LED Tube Light (1') due to the size. It is made for the Godox KNOWLED TP2R Pixel RGB LED Tube Light (2').

The measurements of the Godox TL60 RGB LED Tube Light (2.5') differ enough as to not allow the Godox Air Soft Tube for KNOWLED TP2R Tube Light to be compatible with this light.

Answer applicable for both ASTERA TITAN Tubes and Nanlite PavoTubes alike: Hi, I took a risk purchased this and I was able to use my Pavotube 30 ii XRs with this soft box. Godox tubes are slightly thicker in cross-section diameter (compared to both Pavotubes and Astera Titans) so naturally the locking clamps on this soft box is slightly bigger but there are two ways around it: 1) Replace the Godox tube 4 locking clamps from the mounting bracket with Pavotube clamps. You have to drill 6 holes into the bracket to install the pavotube clamps. 2) Use a stiff rubber lining to fatten up the top hinge of the godox locking clamp, this reduces the space and brings the top part of the locking clamp closer to the cross-section diameter of a pavotube. After a few rounds of lining, the Nanlite eventually gips without any movement.

Hi, I took a risk purchased this and I was able to use my Pavotube 30 ii XRs with this soft box. Godox tubes are slightly thicker in cross-section diameter (compared to both Pavotubes and Astera Titans) so naturally the locking clamps on this soft box is slightly bigger but there are two ways around it: 1) Replace the Godox tube 4 locking clamps from the mounting bracket with Pavotube clamps. You have to drill 6 holes into the bracket to install the pavotube clamps. 2) Use a stiff rubber lining to fatten up the top hinge of the godox locking clamp, this reduces the space and brings the top part of the locking clamp closer to the cross-section diameter of a pavotube. After a few rounds of lining, the Nanlite eventually gips without any movement.

The Godox Air Soft Tube for KNOWLED TP4R Tube Light (B&H# GOTPS4A) is for the Godox KNOWLED TP4R Pixel RGB LED Tube Light (4') (B&H# GOTP4R) only. One would have to replace the included clamps with those designed for use with the Nanlite PavoTube II line such as the Nanlite PavoTube Transparent Polycarbonate Clip with Two 1/4"-20 Receivers (B&H# NAHDT121C), something which is not possible to mount to the Godox product without drilling holes. We therefore cannot recommend it.