The stereo condenser microphone pair can be adjusted for A/B or X/Y configurations, depending on the desired stereo field width, and X6 sports plenty of connectivity, including two XLR input jacks with 24 or 48V phantom power, one 3.5mm stereo aux input with plug-in power, a stereo 3.5mm line output, and a USB-C port with 6x2 audio interface capability, just to name a few. The color touchscreen makes it easy to operate the X6 like an app, with an intuitive and colorful interface, and the recorder can be mounted on cameras and stands via its 1/4" slot for extra versatility. With up to 22 hours max battery life and the ability to take up to 512 GB microSDXC cards, the X6 will keep you creating for as long as your imagination allows, anywhere you want.
Use the Launcher to select from Podcast, Music, Interviews, Field Recording, and 6-track multitrack recording. Start fast, start right, and get exactly what you need.
- Two built-in condenser mics with angle adjustment and switchable A/B or X/Y patterns
- Two XLR 3-pin inputs with selectable mic- or line-level operation and 24/48V phantom power
- Extra 3.5mm stereo aux input which supports plug-in power
- 3.5mm stereo line output for sending your mix to external devices and audio systems
- Powerful 3.5mm headphone output, delivering 45mW per channel
- USB-C port for audio interface duties supporting 6 simultaneous inputs and two outputs
Not only does this mean you will have the highest quality audio, but you will have a dynamic range that allows you to overcome those less-than-ideal realities that can often occur on a shoot. The X6 gives you a time-code sync and app control options via Bluetooth, allowing you to align your audio with your video, even when you have no audio on your camera. Upgrade your audio and reduce your worries with your own Portacapture X6.
The AK-BT1 Bluetooth Adapter is sold separately.
Even in these extremes, you are expected to capture the sound and deliver a clean result. The 32-bit float point recording technology in the Portacapture X6 gives you a much lower floor and higher ceiling to achieve audio success without distortion.
Whether you need to tame the wind when recording outside or want to add the ambiance of reverb to your vocals, the X6 has you covered. From smoothing out your input to preventing extreme peaks or eliminating plosives in dialog, you can count on the X6.
Just select the one that applies and start to record. Each setting was carefully tuned by TASCAM audio engineers for the defined use case. They set it all up, so you don't have to.
Designed for microSD devices such as smartphones, drones, and action cameras that can capture Full HD and 4K video, as well as raw and burst photography, the 64GB Extreme UHS-I microSDXC Memory Card from SANDISK has a capacity of 64GB, is compatible with the UHS-I bus, and features a speed class rating of V30, which guarantees minimum write speeds of 30 MB/s. If your device does not support the V30 standard, this card also supports the U3 standard, which also guarantees minimum write speeds of 30 MB/s. Read speeds are supported up to 170 MB/s, and write speeds max out at 80 MB/s.
Aside from support for UHS-I, V30, and U3, SANDISK also built this card with support for the Application Performance Class 2 (A2) spec, which includes optimizations to give Android users an improved mobile experience, delivering faster mobile app performance. The A2 spec allows the card to manage random read input-output access per second (IOPS) operations so it can quickly open apps and process accompanying tasks, such as audio, graphics, saved profiles, and in-app permissions.
As with most SANDISK media, this memory card is shockproof, x-ray proof, and waterproof, while also being able to withstand temperature extremes. Additionally, SANDISK's Memory Zone app offers users a simple way to organize, browse, and back up files on their Android mobile device.
This pack of eneloop Pro AA Rechargeable Ni-MH Batteries from Panasonic comes with a charger, and the batteries are pre-charged and ready-to-use. They are not subject to any memory effect so you can charge them up to 500 times whether they are fully or partially drained. They maintain 85% of their charge after one year, and remain functional down to -4°F.
This Revo Hot Shoe to 1/4"-20 Male Post Adapter has a threaded 1/4"-20 stud on the top and a "cold" male flash shoe on the bottom.
This handy little adapter allows you to mount camera accessories that only come with a 1/4"-20 socket to cameras, rigs, camera brackets, and any tripod or light stand that only feature a flash shoe. For added security, the knurled locking ring assures a tight connection to the accessory.
With its smooth on-axis tone, great off-axis rejection, and straightforward operation, the Audio-Technica AT875R short shotgun microphone is well suited for budget-conscious indie films, TV shoots, nature recording, and documentary projects where simplicity and quality sound are prioritized.
The AT875R's high sensitivity allows it to perform reliably with a variety of microphone preamp classes. Its full-spectrum frequency response utilizes a gentle increase in high frequencies to enhance intelligibility and compensate for loss in clarity resulting from wind protection.
The durable housing ensures rugged dependability while maintaining a light weight that won't burden your boompole or camera, and the included accessories accommodate mounting the AT875R to a mic stand, boompole, or camera-mount microphone holder.
For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the separately available Rycote Windshield Kit 3, a complete windjammer, windshield, and shockmount suspension system.
The SM3-R Camera Shoe Shockmount from RØDE is a suspension shockmount with a camera shoe adapter for mounting various RØDE microphones onto a camera using a standard hot/cold shoe mount. It is built with dual Rycote Lyre mounts to provide maximum isolation from any handling vibrations.
Featuring four possible mounting points to suit the complete range of compatible RØDE on-camera microphones, the shock mount also has an integrated cable management clip. It is compatible with the following microphones: M5, NT5, NT55, NTG1, NTG2, NTG3, NTG4, and NTG4+.
The black Kopul CMX-RC30 is a coiled, right-angle stereo mini cable designed for connecting mixers and recorders to DSLR cameras or camcorders, as well as home audio devices where 3.5mm stereo mini plugs are needed at both ends of the cable. Intended as a replacement cable for Kopul CMX-1 & CMX-1-V2 two-channel mini mixers and CMX-2 & CMX-2-V2 two-channel camcorder XLR adapters, this durable cable can also be used to connect smartphones, tablets, media players, and computers to speakers or car stereos.
The cable features an 8 to 24", stretchable, coiled design, which doesn't interfere with your camera's operation and prevents clutter. The low-profile, right-angled connectors easily fit into tight spaces or hard-to-reach places and are gold-plated to provide a reliable connection between your devices. The cable's OFC spiral shielding helps minimize unwanted RF and EM interference for a clear audio signal.
- Replacement cable for Kopul CMX-1 & CMX-1-V2 two-channel mini mixers and CMX-2 & CMX-2-V2 two-channel camcorder XLR adapters
- 8 to 24" coiled cable design
- Gold-plated 3.5mm mini-connectors resist corrosion for reliable connectivity between your devices
- Low-profile, right-angled connectors fit into tight spaces or hard-to-reach places where a normal straight connector cannot fit
- Coiled design reduces clutter and prevents excess cable from interfering with the operation of a DSLR camera or camcorder
- OFC spiral shielding minimizes RF or EM interference while maintaining cable flexibility
- Certifications: CE, RoHS, WEEE
The Kopul Coiled 3-Pin XLR-M to Angled 3-Pin XLR-F Cable provides high-quality audio transfer and is particularly suited for ENG/EFP applications. It features an oxygen-free copper core and silver-plated contacts for clean signal transfer. The cable has a 3" coiled section, with 1" straight leads into the connectors. The cable measures approximately 10" end to end, and can be extended to at least 1.5 feet. It has a 3-pin Neutrik NC-XX XLR male connector on one end and an angled 3-pin Neutrik NC-XX XLR female connector on the other.