From Manufacturer
Access your multitrack recorder quickly and easily in the field with the Sound Devices MixPre-10 II 10-Channel / 12-Track Multitrack 32-Bit Field Recorder Kit with CS-633 Production Case from B&H. The kit supplements the powerful and versatile recorder/mixer with a rugged case that provides access to the MixPre-10 II's controls and includes a waterproof cover and extra pockets for wireless components. Pick up a separately available shoulder strap or harness, and wear the bag during production for a much easier and comfortable working experience.
For professional videographers, field recordists, podcasters, and Ambisonics enthusiasts who need pristine audio capture of up to eight microphones, the Sound Devices MixPre-10 II multitrack field recorder is an ideal tool. Record up to ten tracks of external sources (eight channels via XLR-1/4" combo jacks and two channels via a 3.5mm mini jack)—as well as a stereo mix—at sample rates and resolutions of up to 192 kHz / 32-bit, all while monitoring audio in headphones. If you choose to use the MixPre-10 II to stream audio, you'll be able to achieve sample rates up to 96 kHz.
The MixPre-10 II offers many upgrades over its predecessor. Chief among these features is the ability to record at 32-bit floating point to an internal SD card. The unit also functions as an audio interface capable of 32-bit floating point streaming over USB to a Mac computer. This makes it nearly impossible for you to clip (distort) audio on the way in. Whether you're recording hot or making use of the unit's astounding 142 dB dynamic range, you'll only be handicapped by the quality of your microphone.
The device sports the same Kashmir preamps as the MixPre-10T with one key difference: an even lower noise floor, at 130 dBV. With line-level XLR and 3.5mm outputs, you can monitor in both headphones and on a compatible line-level device at the same time. Timecode connections are made possible via BNC, HDMI, and 3.5mm connections.
All of this is available in an eight-channel package that can be powered from wall chargers, AA batteries, or Sony L-series batteries. Whether you use the device in an advanced or basic capacity, the MixPre-10 II will suit any intimate, field-based production.
The unit can send a complete 32-bit float audio signal over USB when connected to a Mac computer running macOS Catalina (version 10.15 or later).
- Kashmir microphone preamps with 48V phantom power
- Internal timecode generator
- Sample rates up to 192 kHz
- Bit depths up to 32-bit float
- Adjustable Limiters
- SD card recording and reading
- Backup to USB drive
- 10 seconds of pre-roll at 48 kHz
- USB control surface support
- Customize with plugins
- Add low cut, high pass, delay, polarity invert, and panning
- Simultaneous recording, mixing, and USB audio streaming
- Trigger record via timecode or HDMI timecode
- Bluetooth for wireless control via Wingman app
- Basic, Advanced, and Custom modes
- High-fidelity headphone amplifier
- Firmware 9.0: Adds a full slate mic routing matrix; will now support two instances of the optional NoiseAssist plug-in (available separately).
The Sound Devices CS-633 Production Case For 633 Mixer is designed to store and transport your Sound Devices 663 Compact Field Mixer alongside your wireless mics, transmitters, receivers, cables, and accessories. It is constructed of 1000-denier Cordura nylon with a rigid plastic frame. Its main section and pocket interior are padded to offer more protection.
The case includes dedicated 6" nylon cable sleeves on both sides to connect to your microphones while the case is zipped closed. A double translucent plastic rain cover allows you to monitor the mixer while keeping it protected from the elements. The case comes with a carrying handle. Compatible shoulder straps and harnesses are sold separately.