WD 10TB Red Plus 7200 rpm SATA III 3.5" Internal NAS HDD (2-Pack)

BH #WE10TRPS3I2K
Print
WD 10TB Red Plus 7200 rpm SATA III 3.5" Internal NAS HDD (2-Pack)

2

Pieces

Key Features
  • 10TB Storage Capacity
  • 3.5" Form Factor
  • SATA III 6 Gb/s Interface
  • 512MB Cache
The 10TB Red Plus 7200 rpm SATA III 3.5" Internal NAS HDD from WD is built to handle the workloads of RAID-optimized NAS systems with up to 8 drive bays, including home offices and power users, small to medium businesses, and consumer and commercial NAS systems. This 10TB drive operates using a SATA III 6 Gb/s interface, a 512MB cache, and a rotational speed of 7200 rpm, which all help to ensure uninterrupted data transfers with a rate of up to 260 MB/s. This drive also features high levels of reliability, with 600,000 load/unload cycles, < 1 in 1014 non-recoverable read errors per bits read, a workload rate of 180TB per year, dual-plane balance control technology, and a 1 million hours MTBF. WD's NASware helps increase system compatibility, allowing Red Pro drives to be more easily integrated with your existing network infrastructure, while noise and vibration protection is provided by Rotation Vibration (RV) sensors.
More Details
In Stock
No Store Display
Free Expedited Shipping
Protect Your Gear
Add a protection plan from $38.00
Ask an Expert
800-606-6969

WD Plus Overview

The 10TB Red Plus 7200 rpm SATA III 3.5" Internal NAS HDD from WD is built to handle the workloads of RAID-optimized NAS systems with up to 8 drive bays, including home offices and power users, small to medium businesses, and consumer and commercial NAS systems. This 10TB drive operates using a SATA III 6 Gb/s interface, a 512MB cache, and a rotational speed of 7200 rpm, which all help to ensure uninterrupted data transfers with a rate of up to 260 MB/s. This drive also features high levels of reliability, with 600,000 load/unload cycles, < 1 in 1014 non-recoverable read errors per bits read, a workload rate of 180TB per year, dual-plane balance control technology, and a 1 million hours MTBF. WD's NASware helps increase system compatibility, allowing Red Pro drives to be more easily integrated with your existing network infrastructure, while noise and vibration protection is provided by Rotation Vibration (RV) sensors.

Highlights
  • 10TB storage capacity
  • For RAID-optimized NAS systems with up to 8 bays
  • Workload rating of up 180TB per year and 1 million hours MTBF
Ideal For
  • Home offices and power users
  • Small to medium businesses
  • Commercial and consumer NAS systems
Tuned for NAS with NASware
Western Digital's exclusive NASware technology fine tunes drive parameters to match NAS system workloads, which helps increase performance and reliability.
Designed for Continuous Operation
Since your NAS system is always on, a reliable drive is essential. WD Red Plus hard drives are designed for systems that operate 24/7, giving users the confidence of knowing they can reliably access their data.
Tested for Dependable Compatibility
Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS enclosures.
Optimized for Lower TCO
WD Red Plus drives are engineered to use less power (versus previous models) and run cooler, which reduces operating costs and helps reduce heat in thermally challenged NAS boxes.
Powered for Strong Performance
Despite using less power, the drives have plenty of bandwidth to handle the mixed performance demands of multi-drive NAS systems.
Balanced for Increased Reliability
Hard drives that are not properly balanced may cause excessive vibration and noise in multi-drive systems, which could reduce hard drive life span and degrade the performance over time. WD's enhanced dual-plane balance control technology significantly improves balance and increases overall drive performance and reliability.
Limited 3-Year Warranty
Western Digital stands behind their NAS storage solutions with the assurance of a limited 3-year limited warranty and world-class support services for hassle-free data storage.
Desktop Drives vs. WD Red Pro
Compatibility
Unlike desktop drives, WD Red hard drives are specifically designed and tested for NAS and include NASware technology which fine tunes drive parameters to match NAS system workloads for optimum performance.
Reliability
Desktop drives aren't typically designed for the demands of an always-on NAS environment. WD Red hard drives are designed to perform under tough conditions encountered in high-intensity 24/7 multi-user NAS environments.
RAID Ready
WD Red hard drives are engineered with RAID error recovery control to help reduce failures within multi-bay NAS systems, unlike most desktop drives that are configured for generic use.
Noise and Vibration Protection
Designed to operate solo, desktop drives typically offer little or no protection from the noise and vibration present in a multi-drive system. WD Red hard drives include Rotation Vibration (RV) sensors that anticipate and proactively counteract disturbances caused by increased vibration often found in multi-bay NAS systems.
UPC: 718037906201

WD Plus Specs

Key Specs
Total Installed Storage
10 TB
Drive Type
SATA III / 3.5" HDD (7200 rpm)
Read Speed
Maximum: 260 MB/s
Write Speed
Maximum: 260 MB/s
Total Installed Storage
10 TB
Drive Type
SATA III / 3.5" HDD (7200 rpm)
Performance
Read Speed
Maximum: 260 MB/s
Write Speed
Maximum: 260 MB/s
Encryption Support
No
Mean Time Between Failures (MTBF)
1.0 Million Hours
Endurance (Total Bytes Written)
180 TB
General
Operating Conditions
32 to 149°F / 0 to 65°C
Storage Conditions
-40 to 158°F / -40 to 70°C
Dimensions
5.8 x 4 x 1" / 147 x 101.6 x 26.1 mm
Weight
1.65 lb / 0.75 kg
Packaging Info
Package Weight
1.79 lb
Box Dimensions (LxWxH)
7.6 x 5 x 2.6"

WD Plus Reviews

Works great

By Zach
Rated 5 out of 5
Date: 2026-05-30

Had two back-to-back DAO drives from Newegg due to how poorly they packaged it, bought this one from B&H and worked perfectly. B&H actually properly packaged it; I will by my NAS drives here from now on

FAST NAS DRIVE

By Cooper
Rated 5 out of 5
Date: 2026-03-11

Drive came sooner than expected; was a cinch to set up; is fast and garganuan.

See any errors on this page?

Are these CMR drives? The Specs don't say and ...

Are these CMR drives? The Specs don't say and it's important.
Asked by: christian
Yes, the WD 12TB Red Plus 7200 rpm SATA III 3.5" Internal NAS HDD is a CMR (Conventional Magnetic Recording) drive.
Answered by: JP A
Date published: 2025-11-25

Is the WD 8TB Red Plus 5640 rpm SATA III 3.5" ...

Is the WD 8TB Red Plus 5640 rpm SATA III 3.5" Internal NAS HDD (2-Pack) compatable with the Synology DS225+?
Asked by: Bud
The WD 8TB Red Plus 5640 rpm SATA III 3.5" Internal NAS HDD (2-Pack), B&H # WE80EFPXSPCK, is not compatible with the Synology DS225+; the DS225+ is only compatible with Synology drives such as the Synology 8TB HAT3320 Plus Series SATA III 3.5" Internal NAS HDD, B&H # SYHAT33208T.
Answered by: Miguel M
Date published: 2025-10-19

What is the difference between this and WD80EFPX ...

What is the difference between this and WD80EFPX ?
Asked by: Maheswar
There is no difference. The additional characters after the "WD80EFPX" for the manufacturer's part number of an individual drive from the WD 8TB Red Plus 5640 rpm SATA III 3.5" Internal NAS HDD (2-Pack), BH #WE80EFPXSPCK, are WD's internal marketing code.
Answered by: Elchanan P
Date published: 2025-11-25

is the WD Red plus 7200 helium or air filled?

is the WD Red plus 7200 helium or air filled?
Asked by: Keith
The WD 10TB Red Plus 7200 rpm SATA III 3.5" Internal NAS HDD BH #WE10TRPS3IHD is air filled.
Answered by: Thomas M
Date published: 2025-11-25
  • y_2026, m_6, d_3, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_1904586, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It