The Pro Set for Sony VENICE Extension Mini from ARRI provides a robust array of dedicated, cage-type support components for the extension system. This set comprises a BUD-type baseplate, right and left wooden handgrips, 19mm rod clamp, pair of 5.5" 15mm rods, 15mm reduction insert, cable clamp, CTH-2 top handle, cheese plate-style top and back plates, two NATO rails, two rosette rail clamps, and two side brackets. The top plate maintains access to the extension's ND filter slot.
The Baseplate for Sony VENICE Extension Mini from ARRI mounts directly to the bottom of your extension unit to serve as a balance utility plate. It enables forward/back balancing and is compatible with all standard ARRI shoulder pads, bridge plates, SAM plates, and shoulder pad rigs. It has a release button that is accessible from both sides and two M4 threads for mounting side brackets.
The Top Plate for VENICE Extension Mini from ARRI enables you to add a variety of accessories to your extension. This plate provides a rear interface for 15mm LWS rod console, multiple M4 and anti-twist 1/4"-20 and 3/8"-16 threads, and RMB-3, CTH-1, CTH-1, CCH-2, CCH-4 interfaces. It is compatible with the top plate for MōVI, NRB-80, NRB-160, and AMP-1. To make your A.C.'s life easier, it also incorporates threads for mounting a measuring tape stud on both sides
The Back Plate for Sony VENICE Extension Mini from ARRI provides a variety of options for mounting accessories on the back of your mini extension unit. This plate provides multiple M4 and anti-twist 1/4"-20 and 3/8"-16 threads. It mounts using four captive multi-hex screws.
The Side Bracket for Sony VENICE Extension Mini from ARRI adds a variety of accessory mounts to your extension unit. This cage-type component provides a NATO rail with a safety release and multiple anti-twist 1/4"-20 and 3/8"-16 threads. It requires separate top and bottom plates on which it mounts using captive multi-hex mounting screws.
The Cable Clamp for Sony VENICE Extension Mini from ARRI provides strain relief for the cable connecting the extension system to your VENICE camera body and recording unit. It can be mounted on the right, left, or rear of the baseplate for the Sony Venice Extension Mini.
Integrate a 19mm rod clamp into your Sony BURANO configuration using this ARRI NRC-1 NATO Rail Clamp. The clamp attaches to any of the BURANO-compatible ARRI side brackets via a NATO rail clamp. It features a single 19mm rod clamp to secure rod-based lens accessories like follow focus motors. The clamp has two integrated thumbscrews to tighten both clamps independently.
The ARRI 15mm Reduction Insert is used to adapt a 19mm rod bracket to accept standard 15mm rods. This insert works with any 19mm rod mount.
Add a handgrip or another component to your camera rig using the female rosette NRC-6 NATO Rail Clamp from ARRI. Constructed from aluminum and stainless steel, this clamp enables smooth vertical adjustment along your NATO rail so that you can position your handgrip for maximum comfort.
The left-side Wooden Handgrip WHG-3 from ARRI features a secure, ergonomic grip with a built-in palm rest. This oiled walnut grip mounts on your camera rig via its ARRI rosette with an M6 thumbscrew.
- Contoured oiled walnut grip
- Secure tactile finish
The right-side Wooden Handgrip WHG-3 from ARRI features a secure, ergonomic grip with a built-in palm rest. This oiled walnut grip mounts on your camera rig via its ARRI rosette with an M6 thumbscrew. A 19mm opening in the grip lets you install a separately available MRS-1 runt/stop button.
- Contoured oiled walnut grip
- Secure tactile finish
Secure a NATO rail-mount component on your camera or stabilizer rig using this NRB-80 NATO Rail Bar from ARRI that mounts using M4 screws. This 3.1" NATO rail features anti-twist accessory threads and a push-button safety release on each end.
Get a secure grip and a variety of accessory mounting options for your camera with the CTH-2 Cage Top Handle from ARRI. This sturdy NATO rail-mount handle provides 360° rotation and front/back adjustment for balancing your rig. Accessory mounts include a single 15mm rod bracket and multiple M4 and anti-twist 3/8"-16 and 1/4"-20 threads. The ARRI multidirectional hex interface lets you expand and customize this handle.
Use this ARRI Bridge Plate Adapter BPA-6 as a support for your small and lightweight cinema camera, such as the ALEXA 35, to support an ARRI studio bridge plate or dovetail interface on the BUD-1. This compact plate features an optically centered 15mm LWS rod block and a small shoulder pad, which allow you to quickly balance, mount, and unmount the camera for different rig setups. It also features a "Touch and Go 35" snap-plate compatible with ARRI bridge plates such as the BP-8 and BP-9.
Standard 15mm rods
ARRI BUD-1 dovetail
ARRI Bridge Plates BP-8 and BP-9
This pair of 5.5" ARRI Lightweight Support Rods feature lightweight stainless steel construction and are designed to reduce your rig's weight. Use them with any 15mm-based accessory or bridgeplate.