This Top Plate System from Wooden Camera lets you configure your FUJIFILM GFX ETERNA 55 camera rig for various setups. The set comprises Front, Side, and Rear Top Plates, each with anti-twist 1/4"-20 and 3/8"-16 threads for mounting accessories. This system is compatible with the separately available Power Strip (when the Side plate is removed), Dual-Rod Clamp, and Bolt-On Rods. It features an etched film plane marker and blind holes that prevent damage to your camera when mounting accessories.
NOTE: The Top Plate System covers the camera's channel for slide-in accessories, such as the native top handle.
Use this Front Top Plate Extension from Wooden Camera to add several anti-twist 1/4"-20 and 3/8"-16 accessory mounts to your FUJIFILM GFX ETERNA 55 camera. This plate is compatible with Wooden Camera's power strip and rear and back plates for the ETERNA 55. It mounts on your camera using the included 3/8"-16 screw and onto the separate strip or plates via the included M3 hex screw.
NOTE: This extension requires a Power Strip or Side Plate Extension for stability; this item does not work properly on the camera alone.
Use this Side Top Plate Extension from Wooden Camera to add multiple anti-twist 1/4"-20 and 3/8"-16 accessory mounts to your FUJIFILM GFX ETERNA 55 camera. Compatible with a sliding top handle and Wooden Camera's front and rear and back plates for the ETERNA 55, it mounts on your camera using the two included 3/8"-16 screws. This plate features an etched film plane marker and blind holes that prevent damage to your camera when mounting accessories. The front 3/8"-16 thread is compatible with W.C.'s bolt-on rods or dual-rod clamp.
Use this Rear Top Plate Extension from Wooden Camera to add multiple anti-twist 1/4"-20 and 3/8"-16 accessory mounts to your FUJIFILM GFX ETERNA 55 camera. This plate maintains access to your camera's EVF and is compatible with Wooden Camera's power strip and front and back plates for the ETERNA 55. It mounts on your camera using the included 3/8"-16 screw and to the separate strip or plates via the included M3 hex screws.
NOTE: This extension requires a Front Plate and Power Strip or Side Plate Extension for stability; this item does not work properly on the camera alone.