Mount the RDL Active Single-Pair Sender into a single gang wall box for a wall mounted receptacle that accepts either balanced microphone or line-level inputs. Featuring a 3-pin XLR female connector on the front, power, Ethernet connections, and DIP switch selections are made on the back panel. The module provides IEC P24 phantom and accepts input signals from balanced line-level sources or from both dynamic and condenser microphones. The input signal is buffered or amplified using a studio-quality preamplifier optimized for normal operating levels. The pre-amplified input source is routed to one Format-A output cable pair, A, B or C, selected during installation using a rear-panel switch. Two other single-pair senders may be chained with the D SERIES TPSML1A, or a single two-pair sender may be connected.
- Balanced Microphone or Line-Level XLR Input
- Switch-Selectable Mic or Line Operation on Rear Panel
- Switch-Selectable Mic Gain on Rear PanelSwitch-Selectable P24 Phantom for Mic Inputs
- Mic High Gain: 60 dB
- Mic Low Gain: 46 dB
- Line Gain: Unity
- Switch Selects which RJ45 Pair (A, B or C) is Fed
- Signal and Power Pair Pass-Through on RJ45 Jacks
- Remote Powering through Twisted Pair Cable
- Fused Local Power Feeds all Connected Modules
- Local Power Input on Terminal Block
- Blue LED in XLR Indicates Module is Powered
- Daisy-Chain with Single-Pair or Two-Pair Senders
- Studio-Quality Precision Active Balanced Circuitry