Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Video Chat with a Pro Video Expert - Live
Key Features
- Ninja TX GO 5.2" Monitor/Recorder
- 2 x L-Series/NP-F 5200mAh Batteries
- L-Series Fast Charger, D-Tap Cable
- Power Kit Carry Case
Wirelessly transmit and monitor 4K video with this Atomos Ninja TX GO 5.2" Camera Monitor/Recorder with Universal Power Kit put together by B&H. This kit includes the Ninja TX GO 5.2" HDMI camera monitor/recorder, power and video cables, and a power kit with two L-series batteries, a fast charger, a D-Tap cable, and a power kit carry case.
More DetailsIn Stock
Protect Your Gear
Add a protection plan from $109.99
See Options
See any errors on this page?
Can camera control with Sony cameras be ...
Can camera control with Sony cameras be established via USB C cable and/or a WiFi linkage?
Sony camera control with the Atomos Ninja TX GO 5.2" HDMI Wi-Fi-Enabled Camera Monitor/Recorder would be supported via USB-C.
Date published: 2026-02-01
Does this unit integrate camera control, ...
Does this unit integrate camera control, touch-to-focus with the Sony EV-10 II?
Yes, when using the Sony ZV-E10 II Mirrorless Camera with the Atomos Ninja TX GO 5.2" HDMI Wi-Fi-Enabled Camera Monitor/Recorder camera control is supported. The following control options are supported:
Rec Start/Stop (Video Mode)
White Balance
Shutter Speed
Aperture
ISO
Camera Status
Timecode Display
Shutter Release (Photo Mode)
Touch to Focus
Date published: 2026-01-02
can you record raw on this from sony fx30?
can you record raw on this from sony fx30?
Yes, the Atomos Ninja TX can record RAW video from the Sony FX30 via HDMI as 16 bit RAW output, which is saved as ProRes RAW.
Date published: 2026-06-11
Can this monitor record 60 fps in 5.7K and 5.8K ...
Can this monitor record 60 fps in 5.7K and 5.8K ProRes Raw on the Panasonic GH7?
With the Ninja TX GO, the GH7 can only output 5.7K at up to 30p (29.97p). With the Ninja TX, you can record ProRes RAW at 5.7K up to 60p. For 5.8K, however, the camera only outputs up to 30p.
Date published: 2026-01-01
What monitors will receive the signal this ...
What monitors will receive the signal this monitor transmits? Can you please list some compatible “RX” models?
The Atomos Ninja TX GO 5.2″ HDMI Wi‐Fi monitor/recorder can transmit NDI/HX3 signals to compatible RX devices over a network. Compatible receivers include the Atomos RX 4K/HD Wireless Video Monitoring Receiver, Shinobi 7 RX Monitor & Receiver, Ninja Ultra HDR with Connect module, and other Atomos monitors upgraded with the Connect module.
Date published: 2026-06-05
Will this record 4k video from a Canon 300 Mark ...
Will this record 4k video from a Canon 300 Mark II ? If so, which formats/rates etc...
Yes, the Atomos Ninja TX GO 5.2" Camera Monitor/Recorder with Creator Accessory Kit will record 4k video from a Canon Cinema EOS C300 Mark II. The Atomos Ninja TX GO 5.2" Camera Monitor/Recorder will record ProRes RAW 4k UHD at 23.98, 24, 25, and 29.97 fps. The Atomos Ninja TX GO 5.2" will also record ProRes 4.2.2 4k up to 60 fps, H.264/H.365 4k up to 60 fps and HD up to 120 fps.
Date published: 2026-01-25
Do the touch controls work with Canon EOS R5C ...
Do the touch controls work with Canon EOS R5C cameras?
The Atomos Ninja TX GO 5.2" HDMI Wi-Fi-Enabled Camera Monitor/Recorder (B&H# ATNINJATXGO) is not currently compatible with the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C) in terms of touch controls. However, it can record the HDMI out as ProRES RAW. For updated compatibility information into the future, please see these two manufacturer webpages:
https://bit.ly/4qXrhmX
https://bhpho.to/4a3fmy0
Date published: 2026-02-06
Can this be used with a Samsun T9 for RAW record?
Can this be used with a Samsun T9 for RAW record?
No, for RAW capture with the Atomos Ninja TX GO 5.2" HDMI Wi-Fi-Enabled Camera Monitor/Recorder you would be required to capture internally to a CFexpress Type B card.
Date published: 2026-03-12