Video Chat with a Pro Audio Expert - Live

Blackstar Amped 3 100W Modeling Floorboard Guitar Amplifier with AIRWIRE i58 Wireless Instrument System (5.8 GHz)

BH #BLAMPED3WI58 (B&H Kit)
Print
Blackstar Amped 3 100W Modeling Floorboard Guitar Amplifier with AIRWIRE i58 Wireless Instrument System (5.8 GHz)
Key Features
  • Floorboard Amp with Power Amplifier
  • Wireless 5.8 GHz Instrument System
  • 100' Transmission Range
Rock the stage with flexible and powerful tones with the Blackstar Amped 3 100W Modeling Floorboard Guitar Amplifier with AIRWIRE i58 Wireless Instrument System (5.8 GHz). This B&H Kit includes a Blackstar Amped 3 100W floorboard and a wireless AIRWIRE i58 transmitter and receiver. The transmitter and receiver provide a 100' range that covers large stage setups.
More Details
In Stock
No Store Display
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $54.99
Ask an Expert
800-606-6969
Kit Contains:
Blackstar AMPED 3 100W Modeling Floorboard Guitar Amplifier
Portable, All-in-One, Multi-Channel Amplifier
For those seeking a compact home studio guitar rig that can easily be brought to gigs, look no further than AMPED 3 from Blackstar, a 100W digital modeling floorboard amplifier with power reduction down to 1 or 20W, and designed to fit snuggly into your pedalboard. The AMPED 3 features six amp voices through the patented ISF tone control knob and three power amp responses (EL84, EL34, and 6L6) across its three footswitched channels (clean, crunch, and overdrive).

The AMPED 3 contains a surprising amount of features for such a compact amp, including built-in clean boosting with routing to either the preamp or power amp, footswitchable reverb with light and dark settings, master volume and presence control, selections for channel voicings, 3-band tone control, and Blackstar's advanced Cab Rig technology that lets you select between three fully mixed guitar rig tones and send the output over USB-C, balanced XLR, or the 1/4" headphones jack. You also get plenty more I/O for handling any scenario, stage or studio, such as a series FX loop, 3.5mm MIDI I/O, 8- or 16-ohm speaker outputs, and two 9 VDC outputs for powering pedals in your board setup. AMPED 3 includes an IEC power cable as well as a built-in tuner.

Three Channels, Six Voicings
AMPED 3 distinguishes itself with not only three channels, more than the typical compact guitar amp, but two distinct voicings per channel. Selectable via three metal switches on the amp, you can find your preferred channel for the musical moment, then refine things further to get as clean or crunchy as you like.

On the Clean channel, you can switch between a warm or bright voicing, and on the Crunch channel, you can choose between crunch or super crunch. Finally, the Overdrive channel sports two different overdrive styles (OD1 or OD2) for further versatility.

Uncompromising Control
The AMPED 3 floorboard amplifier is highly compact, yet sacrifices none of the controls expected of a flexible modeling amp. For each channel, you get gain and volume control as well as 3-band tone control (bass, middle, and treble).

The clean channel has a special clean boost that enhances fullness, which can be routed either before or after the preamp, and AMPED 3 also provides presence and master volume control for the final output. You also get Blackstar's patented ISF control, which lets you select from numerous American and British tube amp voices and, of course, switches for selecting power amp responses and power output (1, 20, or 100W), letting you reduce power down for bedroom practicing or studio recording.

Comprehensive I/O
You will never feel disconnected with AMPED 3 thanks to wide ranging I/O that can facilitate any usage scenario.

  • 1/4" input and output, plus 1/4" series effects loop (send, return)
  • Cab rig output over USB-C, balanced XLR, and 1/4" headphone
  • 8- and 16-ohm speaker cabinet outputs
  • 3.5mm MIDI I/O for controlling all parameters remotely
  • Dual 9 VDC power outputs, allowing you to power other pedals in your signal chain
UPC: 845644006878
Blackstar AIRWIRE i58 Wireless Instrument System (5.8 GHz)

Ideal for solo performers looking for freedom of movement on stage, the AIRWIRE i58 from Blackstar is a wireless instrument system that utilizes the 5.8 GHz band to avoid interference from common sources like Wi-Fi. With a highly accurate frequency response of 20 Hz to 20 kHz and a low latency of less than 6 ms, the AIRWIRE i58 offers perfectly preserved tone over long 100' distances.

The Cable Tone switch lets you engage a vintage-style roll-off for when you desire a tone that can only come from using a cable. The optimized internal antenna auto switches to always find the strongest signal and avoid crowded frequencies. Each plug-in transmitter and receiver provides up to nine hours of battery life. With support for up to four AIRWIRE i58 systems at once, you can easily expand your setup to facilitate full bands for rehearsals and live performances. Each unit is compact and can fold its 1/4" connector up for wide compatibility with instruments and easy storage. The AIRWIRE i58 includes a USB-C charging cale.

5.8 GHz for Interference-Free Audio
The system operates in the 5.8 GHz range, which is a less crowded frequency band that is unaffected by nearby Wi-Fi. Bluetooth, and most cellular signals. The extremely short latency and accurate frequency response ensure authentic tone and feel, allowing you to achieve the best possible signal and response on stage without the restriction of cables.
Cable Tone Switch
The AIRWIRE i58 system offers wireless high-res signal transfer, so there is no treble loss, which can occur when using a long cable. However, the system also offers a switchable Cable Tone feature to simulate the tonal effects of a traditional instrument cable via a vintage-style roll-off.
Robust Battery Life
When fully charged, the system can offer 9 hours of play time, so you’ll never have to worry about running out of battery on stage. To save battery, the Receiver will turn off automatically after 10 minutes if no signal is detected.
UPC: 845644008964
Kit Contains:

Blackstar AMPED 3 100W Modeling Floorboard Guitar Amplifier

Key Specs
Type
Modeling Guitar Amplifier Head
Channels
3
Tone Controls
Master Volume, Treble, Mid, Gain, Presence, Channel Volume, Bass
Built-In Effects
Distortion/Overdrive, Reverb
Amplifier
Type
Modeling Guitar Amplifier Head
Power Output
100 W
Tube Types
N/A: Solid-State Only
Channels
3
Tone Controls
Master Volume, Treble, Mid, Gain, Presence, Channel Volume, Bass
Built-In Effects
Distortion/Overdrive, Reverb
Presets
No Preset Saving
Inputs/Outputs
1x 1/4" TS Instrument Input
1x 1/8" / 3.5 mm TRS MIDI Input
1x 1/4" TS Line Output
1x 1/8" / 3.5 mm TRS MIDI Output
1x 1/4" TRS Headphone Output
2x 1/4" TS Speaker Output
1x XLR 3-Pin Emulated Speaker Output
1x 1/4" TS Effects Loop Send
1x 1/4" TS Effects Loop Return
Supported Speaker Load Impedance
8 / 16 Ohms
USB
1x USB-C
Wireless
No
Mobile App Compatible
No
Power
Input Power
100 to 240 VAC, 60 / 50 Hz
Power Consumption
300 W
Physical
Covering
Painted Metal Chassis
Weight
5.64 lb / 2.56 kg
Packaging Info
Package Weight
6.5 lb
Box Dimensions (LxWxH)
15.4 x 8.3 x 6.6"

Blackstar AMPED3 Reviews

See any errors on this page?
Whatever You Need, We've Got It