The OConnor 1040 Fluid Head and flowtech 100 Tripod System with Mid-Level Spreader offers precise pan and tilt control for smooth camera moves with the stability of lightweight flowtech legs. This system supports up to 45 lb and includes a QR plate to securely support cine-style digital or smaller ENG cameras. It includes a carry handle, mid-level spreader, and padded ENG bag.
The OConnor Ultimate 1040 Fluid Head is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn or think about the differences between fluid heads. The head supports 45 pounds' worth of camera and accessories at a center of gravity (COG) 5 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own and helps the camera to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1040 is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1040 extremely versatile and suitable for use with heavy ENG-style cameras all the way down to lightweight cameras, while maintaining the same operational feel.
The 1040 features a large Euro-style quick release plate. The QR plate allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and back, allowing you to tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The included pan handle can be attached to either side of the the fluid head, utilizing the mounting rosette on either side of the head.
The OConnor Mid-Level Spreader for flowtech 100 is a telescoping spreader that easily and securely snaps into your flowtech 100 tripod legs. The mid-level spreader features four locking positions that allow you to adjust the spread of your tripod legs while keeping them from flying open on all surfaces. The advantage of the mid-level spreader over a ground spreader is that you can use it on uneven terrain such as gravel, rocky ground, and on stairs without the mid-level spreader buckling and making the legs unstable. The spreader folds up neatly inside the legs, allowing them to close as if the spreader wasn't inside.
The Carry Handle for flowtech 75/100mm Tripod from Vinten enables you to carry your lightweight flowtech tripod single-handedly. This handle mounts easily on one of the tripod's accessory docks and is compatible with Sachtler, Vinten, and OConnor flowtech tripods.
Store, protect, and transport your 1030 systems with 30L tripods in this black Soft Carrying Case from OConnor. The case features a padded interior, zipper closure and dual carry handles.