Add a bright, high-resolution monitor to control and view your cinema camera footage with the Shinobi 7 II 4K HDMI HDR Monitor with Camera Control from Atomos. This 7" on-camera touchscreen monitor features a 1920 x 1080 display with a high brightness of 2800 cd/m², on-device calibration, and HDMI I/O, and it supports USB-C camera control. The Shinobi 7 II runs the latest AtomOS firmware, which features a variety of on-screen analysis tools.
7" Daylight Viewable Screen
The Shinobi 7 II features a 7" IPS LCD 1920 x 1080 HDR screen that is illuminated by a bright 2800 cd/m² edge-lit LED backlight, making it possible to view in daylight without requiring a hood.
DCI/UHD 4K Input/Output
Monitor up to DCI or UHD 4K30 footage in formats via HDMI 2.0 and output up to 4K30 via the HDMI 2.0 output.
USB-C Camera Control
The monitor features a USB-C control port that supports a variety of cameras from brands such as Canon, FUJIFILM, Nikon, Panasonic, and Sony. For a camera compatibility list, visit the Atomos camera compatibility page. You can set the camera's focus point from the touchscreen and use on-screen sliders to adjust white balance, lens aperture, shutter speed/angle, and ISO.
The shutter-release function lets you take photos directly from the touchscreen, which is useful when shooting multiple exposures for HDR bracketing, focus stacking, and other workflows. A red border clearly indicates whether you are recording the camera feed internally, and whether it's triggered by the monitor or camera.
NOTE: Z CAM camera control is supported with a separately available USB-C to serial cable.
HDR Monitoring
You can monitor up to ten stops of dynamic range of your camera's Log image, which allows
users to accurately assess and capture scenes with a wider dynamic range than conventional monitors.
This is ideal for productions with high-quality visuals that require increased detail and contrast.
Audio Monitoring
Input/output embedded audio via HDMI or via the 3.5mm analog input and output for embedding, as well as convenient audio monitoring.
On-Device Calibration
The USB-C control port also allows you to calibrate the display using a separately available probe for on-device calibration, without the need to plug it into a computer. The screen comes color-calibrated from the factory to ensure accurate image representation out of the box.
Power Options
The back of the monitor features a centered L-series battery slot as well as a 36W USB-C PD power input.
It can also be powered via a separately available L-series battery eliminator (dummy battery) with an external power source.
3D LUT Management
An SD card slot allows you to load custom 3D LUTs and apply them to both input and output signals. The SD card slot also allows you to apply firmware updates.
Supported Log Formats
- ARRI Log CEI160 / CEI200 / CEI250 / CEI320 / CEI400 / CEI500 / CEI640 / CEI800 / CEI1000 / CEI1280 / CEI1600
- Canon C-Log / C-Log 2 / C-Log 3
- FUJIFILM F-Log, PQ (HDR10), HLG
- JVC JLog
- Nikon N-Log
- Sony S-Log / S-Log2 / S-Log3
- Panasonic V-Log / HLG
- RED Log3G10 / Log3G12 / RED LogFilm
- PQ10k
- HLG
Gamut
- Sony SGamut / SGamut3 / SGamut3.cine
- Canon Cinema / DCI P3 / DCI P3+
- Panasonic V Gamut
- ARRI ALEXA Wide Gamut
- Rec. 709, BT.2020, DCI P3, DCI-P3 D65
- JVC LS300
- RED WideGamut / RED DragonColor / DragonColor2 / RED Color2 / RED Color3 / RED Color4
On-Screen Monitoring Tools
- MultiScope analysis view
- Waveform
- Histogram
- RGB parade
- Vectorscope
- 1x, 2x, and 4x Zoom
- Focus peaking
- Atomos false color
- ARRI false color
- EL Zone false color
- Zebra
- Isolate color channel
- Cine frame guides
- Social frame guides
- Safe areas
- Grid markers
- Anamorphic de-squeeze
- Display flip
UPC: 814164023474