Pedco Ultra Clamp Assembly

The Pedco Ultra Clamp Assembly with 1/4 -20 Screw should be able to clamp to the handlebars of the Ronin-m.

I would say that yes, you can remove the tilting head from the Ultra Clamp Assembly and that you would then have a UltraClamp Aluminum Support Clamp. However, the UltraClamp Aluminum Support Clamp I would only consider for lightweight to medium cameras. It will hold a bigger camera/lens but you are at the edge of the ability of the clamp to hold it securely. I would feel better with heavier duty clamp like the Manfrotto Super Clamp. That will have a hefty margin of safety.

If the camera is less than 5 lbs and is slim enough to fit onto the Pedco Ultra Clamp Asembly, then yes, it can be used horizontally. If you would need more room, you could also consider purchasing the Slik Clamp Head 38, B&H # SLCH38, which would also support 5 lbs, but would give you more room to sit away from the stand, depending on your needs.

Per the manufacturer's website the maximum Safe Load is 6 pounds.

I bought two of these. One I use to secure a dash cam in my car. The other I use to mount a video camera on a horizontal surface. Very rugged. Supports a large camera. I would recommend it to a friend.

My clamp is metal, probably aluminum, I checked it with a magnet. It works very well, I use it with my heavy EOS Mark 2. If your camera is heavy or whatever you are mounting is heavy, I think the metal would be safer.I like a bargain but my motto often is: Cheap is too expensive RegardsBill

The clamp is 1.5 . So it is not possible.

I wouldn't use it like that. It's really a bracket that you can add a pan head to,....rather than a bracket that pans. I have added a Manfrotto Micro Ball Head on top of mine. It's pretty stable once it is torqued down.