Lumedyne Action Pack Fast / X-tra Fast 200Ws Kit

BH #LUZKX2 • MFR #ZKX2
Print
Lumedyne Action Pack Fast / X-tra Fast 200Ws Kit
Key Features
  • 200Ws Fast/X-tra Fast Power Pack
  • 2400Ws Flash Head with Modeling Light
  • Medium Battery with PEPI
  • Coiled PC to Household Sync Cord (2-5')
This is a Lumedyne Action Pack Fast / X-tra Fast 200Ws Kit with extra short flash duration by B&H. Next Generation Power Packs offer the familiar simple controls that have been available from Lumedyne for over thirty years. Enhanced manufacturing techniques allow Lumedyne to offer greater reliability and accurate 7 light Battery power level indications. In addition, a 25Ws setting is available on this pack. This is a full f-stop lower than the Classic predecessors, the #065X/Z Packs.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Lumedyne ZKX2 Overview

This is a Lumedyne Action Pack Fast / X-tra Fast 200Ws Kit with extra short flash duration by B&H. Next Generation Power Packs offer the familiar simple controls that have been available from Lumedyne for over thirty years. Enhanced manufacturing techniques allow Lumedyne to offer greater reliability and accurate 7 light Battery power level indications. In addition, a 25Ws setting is available on this pack. This is a full f-stop lower than the Classic predecessors, the #065X/Z Packs.

Its main feature is an extra fast recycling time - 1.3 seconds @ 200W/s and .2 second @ 25Ws. Flash duration is 1/3000 second @ 200Ws. for those photographers who shoot with leaf-shutter cameras in bright ambient light. These features make this pack suitable for most sports events, and fashion runway photography.

Note: This pack cannot be used with the Mini Battery, and the usual number of flashes per charge of any Lumedyne battery used with this pack will be diminished by 30%. The P2XX Power Pack is not compatible with booster modules.

The flash head included in this kit can handle up to 2400Ws. The flash head has a switched modeling light that dims during pack recycle. The coiled power cord stretches to approximately 4 feet. A head extension cable or a pack-to-stand mounting bracket is available if the head is to be used at a greater distance from the power pack.

A quick trickle charger is provided with this kit, and will recharge this kit's medium battery in 5 to 6 hours.

100% Charge Recycle Indication
Lights up during recycling and goes out only @ 100% charge.
Extended, Pro-Rated Battery Warranty
All Lumedyne batteries are warrantied (under normal use) for 2 years. After that, and until 8.3 years from original purchase, if any Lumedyne Battery fails to take or hold a charge, return it to Lumedyne (with proof of purchase).
Lumedyne will then sell you a replacement battery at a mere percentage of its replacement cost, depending on the age of the battery.
Contact  1-800-586-3396 in the U.S., or E-Mail [email protected]  for more details.

Lumedyne ZKX2 Specs

Power Pack
Maximum Watt/Seconds
200
Guide Number
113 @ 10 Feet @ ISO 100
Recycle Time
1.3 sec @ 200 W/S
0.2 sec @ 25 w/s
Distribution
2 Outlets, Symmetrical
Flash Ready Indicator
Yes
Built-in Slave Cell
No
Auto Dump
Yes
Fan Cooled
No
Number of Flashes @ Full Power
~140 @ full power with included Medium battery
Dimensions
7.2 x 3 x 7.4" (18.3 x 7.6 x 18.7 cm) with medium battery
Weight
4.8 lb (2.4 kg) with medium battery
Flash Head
Maximum Watt/Seconds
2400
Replaceable Flashtube
Yes (AFTQ)
Modeling Light
Yes (AMBR)
Built-in Slave Cell
No
Changeable Reflector
Yes
Cable
7', coiled
Dimensions
2.9 x 2.8" (7.4 x 7.1 cm) without reflector
Weight
1.5 lb (0.7 kg)
Charger
Battery Charge Time
With battery and charger included: 8 Hours
Operating Voltage
120V AC
Weight
0.8 lb (0.36 kg)
Kit
Dimensions
Not applicable
Weight
~9 lb (4 kg)

Lumedyne ZKX2 Reviews

See any errors on this page?
Whatever You Need, We've Got It