Screw on metal hood for standard and telephoto lenses.
UPC: 009219044003
Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Video Chat with a Photography Expert - Live
In Stock
Protect Your Gear
Add a protection plan from $5.99
See Options
Kalt Metal Len Hood Overview
Kalt Metal Len Hood Reviews
Works well
By Andy
Rated 5 out of 5
Date: 2022-03-22
This metal lens hood screws on and looks good.
Affordable Lens Hood
By Keith
Rated 5 out of 5
Date: 2020-05-12
Nicer than plastic, but reasonably priced. Screws on like a filter would, so lens cap may no longer fit, but with a UV filter in place, you don’t need a cap. The hood is securely attached without the need to overly tighten.
See any errors on this page?
Will it accept 58mm center pinch cap?
Will it accept 58mm center pinch cap?
It is not threaded for a 58mm pinch cap.
Date published: 2019-06-26
I have a Nikkor 24-200 zoom lens. Will this hood ...
I have a Nikkor 24-200 zoom lens. Will this hood cause vignetting at the shorter focal lengths, such as 24-50?
The Kalt 67mm Metal Lens Hood will fit the Nikon NIKKOR Z 24-200mm f/4-6.3 VR Lens but will cause vignetting. The Nikon HB-93 Bayonet Lens Hood is designed for that lens and is included. If you need an extra here is the link: https://bhpho.to/2Xdjp8b
Date published: 2021-12-04
will this work on a 45mm lens
will this work on a 45mm lens
Yes, if your lens has a 67mm thread.
Date published: 2020-06-25
Will this work on Panasonic Lumix DMC-G85. ...
Will this work on Panasonic Lumix DMC-G85. 100-300mm lens?
Yes the Kalt 67mm Metal Lens Hood is compatible on the Panasonic Lumix G Vario 100-300mm f/4-5.6 II POWER O.I.S. Lens.
A longer one would be better on that lens like this, https://bhpho.to/3FqJMcI .
Date published: 2022-05-05
question
What is the Diameter at the OPEN END of the lens hood, i.e. the diameter to put a LENS CAP on it?I assume it is 72mm - if so then you might re consider the advice to buy a 67mm lens cap as an accessory to this item . . . that's confusing, at least to me.ThanksWilliam
This lens hood was not designed to hold a lens cap.
Date published: 2020-06-18
question
Can this be used on the Fujinon 14mm and 18-55mm?
l think it would vignette on both lens
Date published: 2018-08-27
question
What is the length from the top to bottom?What is the outside diameter?Thanks!
The length is approximately 21mm not including the threads. 24mm total. The diameter is 65mm (2-1/2 ).cheers, -bill
Date published: 2018-08-27