Video Chat with a Pro Audio Expert - Live

JBL AM6200/95 8" 2-Way 350W High-Power Mid-High Frequency Loudspeaker with Rotatable Horn (Black)

BH #JBAM620095B • MFR #AM6200/95
Print
JBL AM6200/95 8" 2-Way 350W High-Power Mid-High Frequency Loudspeaker with Rotatable Horn (Black)
No Longer Available
No Store Display
Ask an Expert
800-606-6969

JBL AM6200/95 Overview

The black AM6200/95 8" 2-Way 350W High-Power Mid-High Frequency Loudspeaker from JBL is a high power mid-high frequency loudspeaker system comprised of one 8" Cone Midrange Compression Driver (CMCD) and one 1.5" exit, 3" voice-coil HF compression driver.

The multi-band PT Progressive Transition mid-high frequency waveguide provides well controlled 90° by 50° coverage and is rotatable for cabinet positioning in either horizontal or vertical orientation. High-slope crossovers minimize band overlap and well-controlled off-axis response enhances arrayability. The cabinet is fitted with M10 threaded suspension points. The AM6200/95 loudspeaker is suitable for a wide variety of fixed installation applications.

90° x 50° coverage, rotatable for use in either vertical or horizontal orientation
Cone Midrange Compression Driver (CMCD) provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency
Progressive Transition (PT) Waveguide for excellent pattern control with low distortion Bi-Amp/Passive switchable
Separately available planar array frame kits for multiple array configurations
Black DuraFlex finish
Suitable for use with LF and/or subwoofer reinforcement in applications such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live clubs, dance clubs/discotheques, sports facilities, and themed entertainment venues
Suitable for use without LF or subwoofer reinforcement in voice-only PA and delay fill applications

JBL AM6200/95 Specs

System
Frequency Range
200 Hz to 19 kHz, -10 dB (bi-amp mode, with recommended active tuning)
Frequency Response
250 Hz to 17 kHz, ±3 dB (bi-amp mode, with recommended active tuning)
Coverage Pattern
90° x 50°, rotatable waveguide
Directivity Factor
10
Directivity Index
10 dB
Crossover
Modes: Bi-amp/Passive switchable
Passive Slopes: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz
Transducer Power Rating
MF: 350 W (1400 W peak), 100 hours
HF: 75 W (300 W peak), 2 hours
Power Capacity
Long-Term: MF/HF: 350 W (1400 W peak), 100 hours
Maximum Sound Pressure Level (SPL)
Bi-Amp Mode:
MF: 133 dB-SPL continuous averaged(139 dB peak)
HF: 132 dB-SPL continuous averaged (138 dB peak)

Passive Mode:
MF/HF: 132 dB-SPL continuous averaged (138 dB peak)
Sensitivity
Passive Mode: 108 dB SPL, 1W/1m
Transducers
Midrange Frequency Drivers
JBL CMCD-81H Cone Midrange Compression Driver with integral 8" (200 mm) diameter Differential Drive dual voice-coil internal driver
Impedance
8 Ω (nominal)
Sensitivity
108 dB SPL, 1W/1m
High Frequency Driver
JBL 2431H 1.5" (38.0 mm) exit compression driver, 3" (75 mm) voice coil
Impedance
8 Ω (nominal)
Sensitivity
113 dB SPL, 1W/1m
Horn Waveguide
PT-K95MH
Physical
Enclosure
Trapezoidal with 15° side angles, 0.63" (1.60 cm) exterior grade 11-ply Finnish birch plywood
Suspension
Points: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish
DuraFlex finish
Grille
Powder coated 14-gauge perforated steel, with acoustically transparent black foam backing
Input Connector
NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals
Barrier terminals accept up to 10 AWG (5.2 mm2) wire or 0.375" (9 mm) maximum width spade lugs
Speakon in parallel with barrier strip for loop-through
Environmental
Mil-Std 810; IP-x3 per IEC529
Dimensions
21.6 x 22.1 x 25.9" (54.8 x 56.1 x 65.7 cm) (vertical orientation)
Weight
64 lb (29 kg)

JBL AM6200/95 Reviews

See any errors on this page?
Whatever You Need, We've Got It