Panasonic WV-NP244 Network Camera

BH #IPWVNP244 • MFR #WVNP244
Print
Panasonic WV-NP244 Network Camera
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Panasonic WV-NP244 Overview

The Panasonic WV-NP244 i-Pro high-resolution network camera offers a perfect alternative to conventional cameras. Not only does it provide remote Internet viewing and control, but because it is software based, recording and switching are all handled by PC's over the network, eliminating the need for costly, add-on peripherals. The camera supports simultaneous MPEG-4/MJPEG dual streaming, allowing a user to view live in the fast MPEG-4 format while recording in the higher resolution MJPEG compression scheme. A user can also choose one over the other depending on a particular requirement or available network bandwidth.

Note:
Lens not included, accepts CS-mount lenses
Simultaneous MPEG-4 and MJPEG Video Streaming
This allows a user to view live video in the efficient MPEG-4 format while recording is taking place in the higher resolution MJPEG format. A user can also choose one over the other to suit a particular need or network environment. In MJPEG mode, video transmission is possible at speeds up to 30 FPS.
Built-In Microphone
A built-in microphone provides audio along with video monitoring. Audio sensitivity can be set to low, middle or high.
SD Memory Card Slot
In the event of network down time, the camera will store images to an optional SD Memory up to 1GB in capacity. These images will auto transfer to an FTP server once the network is restored. Image transfer to the SD card can also be done manually with the click of a mouse.
Multi-Camera Viewing
A single browser can handle up to 8 cameras with a client able to view up to 4 moving images on one screen at a time.
Multi-Client Access with Password Protection
Up to 8 clients can access a single camera simultaneously over the network for viewing and control, with an elaborate password protection system determining the level of access for general users and administrators.
PoE (Power over Ethernet)
PoE uses the standard LAN cable to power the camera, eliminating the need for a separate power supply and keeping the camera running in the event of a power failure.
Digital Zoom
With the click of the mouse from a remote Internet PC, a user can activate the camera's digital zoom to bring objects of interest into close view. Images can be magnified digitally 1x, 1.5x, 2x, 2.5x and 3x.
Motion Detector with Email Notification
A built-in motion detector will activate an alarm when movement is sensed. Motion detection is fully programmable for area, sensitivity and direction. At the event of an alarm, an Email notification can be sent to up to four designated Internet addresses. An alarm event can also be used to activate external devices or to trigger recording to Panasonic's WJ-ND300 Network Disk Recorder.

Panasonic WV-NP244 Specs

Camera
Signal System
NTSC/PAL (digital)
NTSC monitor out connector
Image Sensor
Color CCD (size not specified)
Number of Pixels
Not specified by manufacturer
Lens
Not included, accepts CS-mount lenses
Auto Iris
DC
Minimum Illumination
1.1 Lux with F1.2 lens
1.5 Lux with F1.4 lens
Controls
Electronic Shutter
AGC
Sensitivity Up
White Balance
Electronic Zoom 1x, 1.5x, 2x, 2.5x and 3x
Motion Detector
Video Out
NTSC 3.5mm Mini video monitor port
Microphone
Built-in
Network
Compression Format
MPEG-4/MJPEG (dual streaming)
Picture Size
Image Resolution

JPEG: VGA (640 x 480), QVGA (320 x 240) max. 30 fps
MPEG-4: VGA (640 x 480), QVGA (320 x 240) max. 30 fps

Image Compression

JPEG: 10 level adjustment, Pull/Push mode
MPEG-4: (Image Quality / Normal / Moving Image) selectable, unicast / multicast
Frame Rate
0.1 fps - 30 fps
Protocol
TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP
Multiple Camera Views
Images from 8 cameras (4 cameras x 2 groups) can be displayed simultaneously
Simultaneous Client Access
8
Interface
Ethernet: RJ45 x1 (10Base-T/100Base-X)
Video Out: 3.5mm mini jack
Storage
SD Memory card slot accepts 64MB, 128MB, 256MB, 512MB and 1GB
Alarm I/O
1 Alarm input, 1 Alarm output
System Requirements
OS

Windows 2000 Professional SP4, Windows XP Home / Professional SP2

Browser

Internet Explorer 6.0 Service Pack2
General
Power Requirements
24 VAC, 12 VDC or PoE
Power Consumption
AC/DC: 4.8W, PoE 4.2W
Operating Temperature
14 - 122°F (-10 ~ +50°C)
Dimensions
2.8 x 2.6 x 6.2" (72 x 65 x 158mm)
Weight
1 lb (450 g)

Panasonic WV-NP244 Reviews

See any errors on this page?
Whatever You Need, We've Got It