Wendt X4 4-Channel Portable ENG/EFP Field Mixer

BH #NAB070454
Print
Wendt X4 4-Channel Portable ENG/EFP Field Mixer
No Longer Available
No Store Display
Ask an Expert
866-842-7675

X4 4-Channel Portable ENG/EFP Field Mixer Overview

The Wendt X4 is a portable, compact 4-channel field mixer designed for audio mixing for film, documentaries, ENG or virtually any application requiring a portable mixer. The mixer features 4 XLR balanced microphone inputs with individually switched phantom power allowing an assortment of dynamic and condenser microphones to be used simultaneously. Each input features a rotary level control and the master level provides global level control over all inputs. In addition switchable gain / attenuation on every input provides 10dB, 20dB and 0dB of level gain for dynamic or condenser microphones.

The output section features stereo XLR balanced outputs and a stereo 3.5mm microphone level output jack for feeding signal to camcorders or smaller portable recorders. The balanced XLR outputs are switchable between mic or line level signal. A limiter switch is also located at the output section. The limiter minimizes transient peaks and reduces distortion caused by signal overload. The X4 is powered with 8-AA Alkaline batteries for up to 15 hours and a 2.1mm center pin jack allows the mixer to be powered with an external 9-18VDC source. A multi-pin accessory connector allows multiple X4s to operate ganged or can be used for monitor returns or external power.

Flexible 4 Channel Configuration
The Wendt X4 offers 4-channel remote mixing capability in a compact, rugged, portable unit.
Balanced Connections
4 balanced XLR microphone inputs provide low noise floor and high signal gain. 2 balanced XLR stereo outputs are switchable to send audio at either microphone or line level signal.
Input Attenuation
All balanced microphone inputs feature 3-position attenuation switches, providing 0dB, 10dB and 20dB of attenuation.
Flexible Powering Options
The mixer is powered via 8 x AA alkaline batteries for up to 15 hours. Provisions for external powering are also provided.
Slate Mic & Test Tone
A Built in Slate Microphone and Test Tone Oscillator provides all the tools needed for meter and tape calibration.

X4 4-Channel Portable ENG/EFP Field Mixer Specs

Inputs
Mic: 4-Balanced XLR Inputs
Output
Line / Mic(switchable): 2-Balanced XLR Outputs
Mic Out: Stereo 3.5mm mini jack 50dB below line levels
Metering
Stereo VU Meters with 12 second illumination switch
Controls
Channel Input: Rotary level control, channels 1-4
Master Level: Rotary Level Control
Pan Switches: Channel 1 and Channel 2 pan switches (right, center and left)
Ref. Tone: 0dBVU 400Hz low distortion sine wave
Battery Test: Indicates remaining battery life
Tape Mix: Switches headphone input to external line in
Power Switch: INT(battery), EXT(external power) and OFF
Preamplifier Gain: 3-position attenuation of 10dB, 20dB and 0dB
Phantom Power: 3-position 48V, 12T and DYN(dynamic)
Low Cut Filters: 3 position switch, 140Hz, 20Hz and 100Hz at 12dB per octave
VU Meter Illumination: Momentary Switch

X4 4-Channel Portable ENG/EFP Field Mixer Reviews

See any errors on this page?
Whatever You Need, We've Got It