Video Chat with a Pro Audio Expert - Live

Demeter HBP-1J H Series Tube Bass Preamplifier with Jensen Transformer

BH #DEHBP1J • MFR #HBP-J
Print
Demeter HBP-1J H Series Tube Bass Preamplifier with Jensen Transformer
Key Features
  • Active/Passive Inputs
  • Balanced XLR & TRS Outputs
  • Unbalanced TRS Output
  • Tuner Output
The HBP-1J with Jensen Transformer from Demeter is a hand-wired preamp specifically designed for bass guitar that provides both tube and solid-state tones. It features a high voltage (250V) tube front end with preamp gain and passive tone controls, a two-band solid-state parametric equalizer tuned for bass, and an active effects loop with send and return level controls. In addition, there is a balanced XLR output switchable for a mic or line level signal to connect to a mixer/recording console or a power amp with an XLR input, as well as both balanced and unbalanced 1/4" TRS line level outputs for connection to an amplifier. A dedicated tuner output and a mute switch allow you to tune up silently.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Demeter HBP-1J Overview

The HBP-1J with Jensen Transformer from Demeter is a hand-wired preamp specifically designed for bass guitar that provides both tube and solid-state tones. It features a high voltage (250V) tube front end with preamp gain and passive tone controls, a two-band solid-state parametric equalizer tuned for bass, and an active effects loop with send and return level controls. In addition, there is a balanced XLR output switchable for a mic or line level signal to connect to a mixer/recording console or a power amp with an XLR input, as well as both balanced and unbalanced 1/4" TRS line level outputs for connection to an amplifier. A dedicated tuner output and a mute switch allow you to tune up silently.

Balanced and Unbalanced Outputs
A fully balanced XLR line output is provided to feed the audio signal from your bass to an external mixing console
Active and Passive Inputs
Separate inputs are provided to connect active and passive instruments
Tube Front End
The HBP-1 uses a 12AX7a tube on the front end for gain and passive tone controls
Adjustable Effects Loop
External effects can be connected through the active effects loop. Send and return level controls are provided on the front panel

Demeter HBP-1J Specs

Inputs
1/4" Active Instrument x1
1/4" Passive Instrument x1
1/4" FX Return x1
IEC Power Cable x1
Outputs
1/4" Tuner x1
1/4" FX Send x1
1/4" Unbalanced Line Out x1
XLR Balanced Line Out x1
Controls
Front Panel:
Volume Control x1
Treble Control x1
Middle Control x1
Bass Control x1
Presence Control x1
EQ In/Out Switch x1
EQ Low Frequency dB Level Control x1
EQ Low Frequency Hz Control x1
EQ Low Frequency Width Control x1
EQ Mid Frequency dB Level Control x1
EQ Mid Frequency Hz Control x1
EQ Mid Frequency Width Control x1
FX Loop In/Out Switch x1
FX Send Level Control x1
FX Return Level Control x1
Mute On/Off Switch x1
Power On/Off Switch x1

Rear Panel:
Line Level/Mic Level Switch x1
Ground Lift Switch
Voltage Selector Switch
Input Impedance
1 MOhm
Minimum Load Impedance
600 ohms
Maximum Output
+24 dBV @ 600 ohms + 28 dB
Gain
Adjustable to +10 dB Mid 440 Hz to 4 kHz
EQ Gain: +/-15 dB
Signal to Noise Ratio
-80 dB
THD
0.5%
Frequency Response
10 Hz to 40 kHz
Tube
12AX7a x1
Parametric Equalizer
Q or width continuously variable
Low 40 to 440 Hz
Mid 440 Hz to 4.4 kHz
Operating Voltage
115 V / 230 V AC switchable
Filament
12.6 V fully regulated
Power Supply
250 V fully regulated
Dimensions
19 x 10.5 x 1.8" (482.6 x 266.7 x 45.7 mm)
Packaging Info
Package Weight
12 lb
Box Dimensions (LxWxH)
21.6 x 15.9 x 7.3"

Demeter HBP-1J Reviews

See any errors on this page?
Whatever You Need, We've Got It