Earthworks M30 Measurement Microphone

BH #EAM30D • MFR #M30
Print
Earthworks M30 Measurement Microphone
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Earthworks M30 Overview

The Earthworks M30 is a cost effective measurement microphone intended for large and small room calibration. The ultra wide frequency response of 9Hz to 27kHz is flat throughout the entire spectrum and results in accurate room calibration using Smaart, MLSSA, SIMM and TEF based systems. The small element yields an omni-directional pattern resulting in a wide pick up area at the front and sides of the microphone capsule. The M30 also ships with a "white" noise generator that is capable of adapting to a 1/2" calibrator adapter for field calibration.

Miniature Omni-directional Capsule
The miniature element provides an accurate omni-directional pattern with an even coherent response at the direct and off-axis sections of the microphone capsule.
Wide Linear Frequency Response
The wide, linear frequency response accurately captures audio signal and reproduces the slightest nuance with great detail.
Uncolored Response
The uncolored, flat signal results in accurate room calibration for indoor and outdoor application.

Earthworks M30 Specs

Transducer
Condenser
Polar Pattern
Omnidirectional
Frequency Response
+/- 1dB 9Hz to 27kHz
+1 / -3dB 5Hz to 30kHz
Dynamic Range (Typical)
Not specified by manufacturer
Signal-to-Noise Ratio
27dB SPL Equivalent (A weighted)
Maximum Input Sound Level
150dB SPL
Power Requirements
+48V Phantom, 10mA
Output Impedance
600 ohms between pin 2 and pin 3
Output Connectors
XLR intended to drive a balanced transformerless input Pin2+
Pad
No
Low Frequency Roll-Off
No
Dimensions
9 x 0.860" (229 x 22mm)(Length x Diameter)
Weight
0.5 lb (225 g)
Packaging Info
Package Weight
1.36 lb

Earthworks M30 Reviews

See any errors on this page?
Whatever You Need, We've Got It