Ask Our Experts800-952-1815
Hello, Log InAccount & Orders
Video Chat with a Pro Audio Expert - Live
Rycote Standard Hole SGM 18cm Foam Windscreen for Rode NTG3, Sennheiser MKH 416/418, and Sanken CS-3e (10-Pack)
10
Pieces
Key Features
- For Rode NTG3 and Sennheiser MKH 416/418
- For Sanken CS-3e
The pack of 10 Rycote Standard Hole SGM 18cm Foam Windscreen is ideal for protecting your Rode NTG3, Sennheiser MKH 416/418, or Sanken CS-3e shotgun microphone from wind noise and the elements.
More DetailsSee any errors on this page?
My question was whether it was equivalent to the ...
My question was whether it was equivalent to the Sennheiser windscreen in high frequency reduction as I will be using it in my studio for a voiceover mic and don’t want to lose any of the high frequencies?
This windscreen would be about equal to any high frequency reductions caused by the Sennheiser windscreen.
Date published: 2024-08-08
What is the diameter on the outside? Thickest ...
What is the diameter on the outside? Thickest part and narrowest part?
A measurement for the exterior diameter of the Rycote Standard Hole SGM 18cm Foam Windscreen for Rode NTG3, Sennheiser MKH 416/418, and Sanken CS-3e has not been provided by the manufacturer.
Date published: 2024-12-17
will this hold a sony ecm-673?
will this hold a sony ecm-673?
Yes, "standard hole" means its very close to size of an XLR connector, all those mics are close to that diameter. Sony may be a tad fatter in diameter, so it will prob be tight. If not rubber band it.
Date published: 2022-05-24
Does it cut down on the High frequencies more ...
Does it cut down on the High frequencies more than the Sennheiser MKH 416 original windscreen?
No HF difference.
Foam windscreen is designed to avoid high-frequency roll-off
Date published: 2021-02-05