Ikegami Pre-Assembled Hyper Dynamic Elevator Camera

BH #IKPACA11E25 • MFR #PAC-A11E-25
Print
Ikegami Pre-Assembled Hyper Dynamic Elevator Camera
Key Features
  • Steel Housing
  • Polycarbonate Window
  • Vandal Resistant Screws
  • 1/3" Sensor
The Ikegami PAC-A11E-25 consists of the ISD-A11 camera installed inside a steel, vandal resistant housing. The housing's superior strength and downward pointing angle makes it suitable for use inside elevators as well as for certain indoor transit environments. The ISD-A11 camera features an advanced WDR function to help it cope with mixed bright and dark images. This is an especially important function inside an elevator given the constant changes in lighting caused by the opening and closing of the elevator doors. Ikegami also supplied the camera with a built-in 2.5mm wide angle lens so that the camera can achieve maximum coverage inside the elevator.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Ikegami PAC-A11E-25 Overview

The Ikegami PAC-A11E-25 consists of the ISD-A11 camera installed inside a steel, vandal resistant housing. The housing's superior strength and downward pointing angle makes it suitable for use inside elevators as well as for certain indoor transit environments. The ISD-A11 camera features an advanced WDR function to help it cope with mixed bright and dark images. This is an especially important function inside an elevator given the constant changes in lighting caused by the opening and closing of the elevator doors. Ikegami also supplied the camera with a built-in 2.5mm wide angle lens so that the camera can achieve maximum coverage inside the elevator.

Camera
Hyper Wide Dynamic Range
The ISD-A11 camera features a sophisticated wide dynamic function to help it adapt to a wide range of lighting conditions including high contrast and backlit scenes.
Auto White Balance
An auto white balance function continuously tracks color temperatures to ensure that accurate color is maintained under different lighting sources.
Housing
Sheet steel construction with vandal resistant screws
Vandal resistant polycarbonate glass

Ikegami PAC-A11E-25 Specs

Camera
Signal System
NTSC
Image Sensor
1/3" Color Pixim DPS Sensor
Resolution
480 TVL
Number of Pixels
390k
Lens
2.5mm, F2.0 Wide Angle Lens built-in (IK-V-4402.5-2.5-HR-FT)
Iris Operation
Fixed
Minimum Illumination
2 Lux at F2.0
Signal-to-Noise Ratio
50dB or better in normal mode (AGC off, DTL off)
Controls
Hyper WDR (over 95dB)
Smart DNR
Intelligent AGC
White Balance (ATW, full time)
Sync
Internal
Video Output
BNC
Audio Output
N/A
Motion Detection
No
Alarm I/O
No
Control Ports
N/A
Power Requirements
12VDC
Operating Temperature
For indoor only
Dimensions
1.6 x 1.6 x 1.8" (40 x 40 x 45mm)
Weight
Not specified
Housing
Housing
Body Construction: Sheet steel 3mm thick
Finish: Epoxy polyester powder
Viewing Window: Vandal resistant polycarbonate glass
Vandal Proof Screw Lock: Provided
Window Dimensions (WxHxD): 2.7 x 1.9 x 2" (68 x 48 x 50mm)
Housing Dimensions (WxHxD): 4.4 x 6.1 x 6.2" (113 x 155 x 158mm)

Ikegami PAC-A11E-25 Reviews

See any errors on this page?
Whatever You Need, We've Got It