ACTi TCM-5611 H.264 Megapixel IP D/N PoE Box Camera

BH #ACTCM5611 • MFR #TCM-5611
Print
ACTi TCM-5611 H.264 Megapixel IP D/N PoE Box Camera
Lens not included
Key Features
  • 1/3" Aptina Progressive Scan CMOS
  • Day/Night Functionality
  • Mechanical IR Cut Filter
  • Bundled 4.2mm (f/1.8) Fixed Lens
The ACTi TCM-5611 H.264 Megapixel IP D/N PoE Box Camera features a 1/3" Aptina progressive scan CMOS sensor, a bundled 4.2mm (f/1.8) fixed lens, and an infrared LED array for day and night surveillance. With the mechanical IR cut filter, the camera assures good color rendition in up to 0.5 lux illumination, whereas it offers monochrome visuals in up to 0.05 lux illumination at f/1.0.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

ACTi TCM-5611 Overview

The ACTi TCM-5611 H.264 Megapixel IP D/N PoE Box Camera features a 1/3" Aptina progressive scan CMOS sensor, a bundled 4.2mm (f/1.8) fixed lens, and an infrared LED array for day and night surveillance. With the mechanical IR cut filter, the camera assures good color rendition in up to 0.5 lux illumination, whereas it offers monochrome visuals in up to 0.05 lux illumination at f/1.0.

Auto White Balance adjusts the red and blue signals in the MWB mode by taking a standard white color reference to get the most natural colors. Auto Gain Control adjusts the signal strength to maintain a constant brightness level.

Offering SXGA resolution (up to 1280 x 1024) at 18 fps, the TCM-5611 IP Camera supports multi-streaming of H.264, MPEG-4, and MJPEG compression codecs. In addition to the digital input/output, the camera has a wide dynamic range that improves the view in bright and low illuminated areas. This helps in an evenly illuminated image, which highlights the greater details to the eye. The two-way audio allows the users to communicate with visitors or intruders. With the motion detection feature, the camera detects presence of relevant motion in the video.

The Class 3 PoE (Power-over-Ethernet) supplies power to the camera from the network itself without any extra wiring for auxiliary power outlets.

1/3" Aptina progressive scan CMOS delivers images without motion blur
Offers day and night surveillance
Mechanical IR cut filter for color rendition
Minimum illumination of 0.05 lux at f/1.0
Bundled 4.2mm (f/1.8) fixed lens
Auto White Balance - adjusts the red and blue signals in the MWB mode by taking a standard white color reference to get the most natural colors
Automatic Gain Control - adjusts the signal strength to maintain a constant brightness level
Produces SXGA resolution (1280 x 1024) at 18 fps
Selectable H.264, MPEG-4 SP, and MJPEG compressions with dual streaming
Digital input/output
Wide dynamic range - enhances the image quality in bright and dark conditions, and brings out the greater details to the eye
Two-way audio surveillance allows the users to communicate with visitors or intruders
Video motion detection - detects relevant motion in the area under surveillance
Class 3 PoE (Power-over-Ethernet) supplies power to the camera from the network itself without any extra wiring for auxiliary power outlets

ACTi TCM-5611 Specs

Device
Device Type
Box Camera
Image Sensor
Aptina Progressive Scan CMOS
USB Cable
1/3" (4.8 x 3.6 mm)
Day/Night
Yes
Minimum Illumination
Color: 0.5 lux at F1.0 (30 IRE, 2400°K); B/W: 0.05 lux at F1.0 (30 IRE, 2400°K)
Color to B/W switch
CDS sensor based switch, configurable
DSP based switch, configurable
Mechanical IR Cut Filter
Yes
IR Sensitivity Range
700 - 1100 nm
IR LED
No
Electronic Shutter
1/30 - 1/1,000 sec (60Hz); 1/25 - 1/1,000 sec (50Hz) (manual mode)
1/5 - 1/15,000 sec (auto mode)
Lens
3.5mm x1 (mini mono)
Focal Length
Fixed focal, f4.2 mm / F1.8
Iris
Fixed iris
Focus
Manual focus
Mount Type
C/CS mount (interchangeable lens)
Horizontal Viewing Angle
64.4°
Video
Compression
H.264, MPEG-4 SP, MJPEG
Maximum Frame Rate vs. Resolution
18 fps at 1280 x 1024 (SXGA); 26 fps at 1280 x 720 (HD 720p); 30 fps at 640 x 480 (VGA); 30 fps at 320 x 240 (QVGA); 30 fps at 160 x 112 (QQVGA)
Streaming
Simultaneous dual streams based on two configurations
Bit Rate
28 Kbps - 6 Mbps (per stream)
Bit Rate Mode
Constant, Variable
Signal to Noise Ratio
More than 44 dB
Image Enhancement
Wide dynamic range; White balance: automatic, predefined and manual; Brightness; Saturation; Contrast; Sharpness; Automatic gain control; Auto exposure: automatic, predefined and manual; Flickerless
Privacy Masking
4 configurable regions
Text Overlay
User defined text on video
Image Orientation
Image flip and mirror
Audio
Compression
8kHz, Mono, PCM, 16 bit encoding
Audio Input
3.5 mm Phone Jack
Audio Output
3.5 mm Phone Jack
Network
3 x 8.7" (77 x 220mm)
Protocol
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet Port
1, Ethernet (10/100 Base-T), RJ-45 connector
Security
IP address filtering; HTTPS encryption; Password protected user levels
Alarm
Alarm Triggers
Video motion detection (3 regions); External device through digital input
Alarm Response
Notify control center; Change camera settings; Command other devices; E-mail notification with snapshots; Upload video, snapshot to FTP server; Activate external device through digital output
Interface
DC Iris Connector
External connector for DC iris lens
Digital Input
1, TTL, terminal block
Digital Output
1, TTL, terminal block
General
Power Source
DC 12V / 5.16 W
PoE Class 3 (IEEE802.3af) / 6.24 W
Weight
0.88 lb (400 g)
Dimensions
2.64 x 2.17 x 5.10" (67 x 55 x 129.5 mm)
Operating Temperature
32 ~ 122°F (0 ~ 50°C)
Approvals
CE, FCC
System Integration
Unified Solution
Fully compatible with ACTi software
ISV Integration
Software Development Kit (SDK) available
Firmware Access Browser
Microsoft Internet Explorer 6.0 or newer

ACTi TCM-5611 Reviews

See any errors on this page?
Whatever You Need, We've Got It