Samsung SND-5080F HD Network Dome Camera (Flush Mount)

BH #SASND5080F • MFR #SND-5080F
Print
Samsung SND-5080F HD Network Dome Camera (Flush Mount)
Key Features
  • Up to 1.3 MP (1280 x 1024) Resolution
  • 16:9 HD (720p) Resolution Support
  • 3.6x Zoom Lens (2.8-10mm)
  • Day/Night Camera with IR Cut Filter
The Samsung SND-5080F HD Network Dome Camera (Flush Mount) with 1.3 MP progressive scan CMOS sensor delivers crisp images in H.264, MPEG-4, and MJPEG formats at a resolution of 1280 x 1024 pixels, and also supports the 16:9 HD (720p) resolution. Featuring a focal length range of 2.8-10 mm, the 3.6x zoom lens has a fast maximum aperture of f/1.2.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Samsung SND-5080F Overview

The Samsung SND-5080F HD Network Dome Camera (Flush Mount) with 1.3 MP progressive scan CMOS sensor delivers crisp images in H.264, MPEG-4, and MJPEG formats at a resolution of 1280 x 1024 pixels, and also supports the 16:9 HD (720p) resolution. Featuring a focal length range of 2.8-10 mm, the 3.6x zoom lens has a fast maximum aperture of f/1.2.

The day/night camera uses an IR cut filter to switch between color and B&W as per the changes in ambient lighting, ensuring optimum color reproduction in daylight, and enhanced visibility at night. Able to capture clear images in low-light conditions, the SND-5080F network camera works in minimum illumination of 0.3 lux at f/1.2 (color), and 0.01 lux at f/1.2 (B&W). Digital noise reduction with 3D+2D filter digitally corrects any video noise that could cause blurring or distortion in the images by minimizing the signal-to-noise ratio penalties. Backlight compensation adjusts video gain to correct the exposure when the object being captured is in front of a bright light. Auto white balance adjusts the red and blue signals in the MWB mode by taking a standard white color reference to get the most natural colors. Automatic gain control allows you to adjust the signal strength to maintain a constant brightness level.

Privacy Masking blanks out an entire area or zone (which is set by a system operator) to eliminate any unnecessary video information from being processed, thus decreasing video traffic over a network. Up to 12 zones can be programmed to output blank video for areas not requiring video surveillance.

The HD Network camera also includes motion detection feature that triggers an alarm when motion is detected in a designated portion of the video display. You can also receive email notifications when motion is detected or upload pre and post alarm snapshots via FTP. The bi-directional communication with audio support enables you to communicate with visitors or potential intruders from the operator’s base station.

Power is supplied to the camera through PoE; hence the camera gets power from the network itself without any extra wiring for auxiliary power outlets. On-board slot is provided for SD card; apart from being convenient for short-term/temporary storage, recording onto SD card also rules out data loss due to network disconnection. The camera also includes video management software that enables seamless integration with Samsung’s CMS Software or third-party software applications.Note: No

Note:
Built-in Mic/Speaker not included
1.3 MP progressive scan CMOS sensor
Supports H.264, MPEG-4, and MJPEG formats
Captures 1280 x 1024 resolution video at 22 fps
Captures 16:9 HD (720p) video at 30 fps
3.6x zoom lens with a focal length of 2.8-10 mm
Fast lens with maximum aperture f/1.2
IR cut filter to switch between color and B&W as per the changes in ambient lighting
Minimum illumination of 0.3 lux at f/1.2 (color) and 0.01 lux at f/1.2 (B&W)
Digital noise reduction with 3D+2D filter digitally corrects any video noise that could cause blurring or distortion in the images by minimizing the signal-to-noise ratio penalties
Backlight compensation - adjusts video gain to correct the exposure when the object being captured is in front of a bright light
Auto white balance adjusts the red and blue signals in the MWB mode by taking a standard white color reference to get the most natural colors
Automatic gain control allows you to adjust the signal strength to maintain a constant brightness level
Privacy masking - blanks out an entire area or zone (which is set by a system operator) to eliminate any unnecessary video information from being processed, thus decreasing video traffic over a network
Up to 12 zones can be programmed to output blank video for areas not requiring video surveillance
Motion detection - triggers an alarm when motion is detected in a designated portion of the video display. You can also receive email notifications when motion is detected or upload pre and post alarm snapshots via FTP
Bi-directional communication with audio support enables you to communicate with visitors or potential intruders from the operator's base station
Power is supplied to the camera through PoE
SD card slot for on-board storage and makes efficient use of bandwidth by reducing the transmission of unwanted data and the chance of data loss due to network disconnection
Video management software enables seamless integration with Samsung's CMS Software or third-party software applications
Supports DDNS and public DDNS services

Samsung SND-5080F Specs

Samsung SND-5080F Reviews

See any errors on this page?
Whatever You Need, We've Got It