Ask Our Experts866-264-7509
Hello, Log InAccount & Orders
Video Chat with a Pro Video Expert - Live
Key Features
- 4-Pin XLR Male to 4-Pin Hirose Male
- Deliver Power from an XLR Output Source
- 6" Length
The Sound Devices XL-H4 Power Adaptor Cable is designed to deliver power from a 4-pin XLR output power source via a 4-pin Hirose connection. It runs 6" long and features a 4-pin XLR male connector on one end and 4-pin Hirose male connection on the other.
More DetailsSee any errors on this page?
question
Can I use this cable on Pix-e7 for power cable? Can't find any 4 pin Hirose connector in the back of the e7 monitor
No, this is the power cable for the Pix 220/240 modlels only. You need a locking DC Coaxial power cable barrel connector to 4-pix XLR if yiu need to use the large battery packs. A better solution is to use the newer smaller D-Tap batteries and use the Pix accessory, Video Devices Coaxial DC Plug to D-Tap Power Cable , listed under Pix E power accessories. Yiu could also take the Pix connector end off your AC power brick, and have a 4-pin XLR connected to it, and the female 4-pin XLR connected to the brick side (where you cut the coaxial connector off), so yiu can still use the AC power supply. If yiu are not familiar with how power cables are wired on XLRs, get a A/V repair service to do this for you. The 4-pin power XLR connectors only use two pins, (not all four at the same time) one set is for 6-VDC connections and the other two are for 12-14 DC connections. You need to meter the connector on your battery pack to see which two and the correct polarity (which pin is + and which is ground/negative connectors. A warning, if you get this wrong, and you will fry you PixE power board in the monitor.
Date published: 2018-08-28