Video Chat with a Pro Audio Expert - Live

Shure RPM181/S Supercardioid Polar Pattern Capsule

BH #SHBETA181SC • MFR #RPM181/S
Print
Shure RPM181/S Supercardioid Polar Pattern Capsule
Key Features
  • Supercardioid Capsule for Beta 181
  • Wide Dynamic Range
  • High SPL Handling
  • No Crossover Distortion
The RPM181/S Supercardioid Polar Pattern Capsule by Shure is one of four interchangeable capsules for Shure's Beta 181 side-address instrument microphone. It features a locking ring which provides a secure connection with the Shure RPM181/PRE. Paired with this preamp, its compact design weighs only 5.1 oz and gets close to any source even in the tightest conditions. With its wide frequency response and high SPL handling, it's great for close-miking in performance settings as well as snare drums and acoutsic instruments. It also performs with little to no crossover distortion and provides exceptional low-frequency reproduction.

The capsule is made with a hardened steel mesh grille that resists denting, wear and abuse. Along with its compact form factor, the diaphragm provides exceptional audio with consistent, textbook-like polar responses resulting in a mic with noteworthy sound and versatility.
More Details
Discontinued
No Store Display
Ask an Expert
800-606-6969

Shure RPM181/S Overview

The RPM181/S Supercardioid Polar Pattern Capsule by Shure is one of four interchangeable capsules for Shure's Beta 181 side-address instrument microphone. It features a locking ring which provides a secure connection with the Shure RPM181/PRE. Paired with this preamp, its compact design weighs only 5.1 oz and gets close to any source even in the tightest conditions. With its wide frequency response and high SPL handling, it's great for close-miking in performance settings as well as snare drums and acoutsic instruments. It also performs with little to no crossover distortion and provides exceptional low-frequency reproduction.

The capsule is made with a hardened steel mesh grille that resists denting, wear and abuse. Along with its compact form factor, the diaphragm provides exceptional audio with consistent, textbook-like polar responses resulting in a mic with noteworthy sound and versatility.

Interchangeable side-address Supercardioid capsule for the Shure Beta 181
Locking ring provides secure connection between capsule and Shure RPM181/PRE preamp
Compact 5.1 oz design gets close to any source even in the tightest conditions
Provides wide dynamic range and high SPL handling
Performs with little to no crossover distortion and provides exceptional low-frequency reproduction
Hardened steel mesh grille resists denting, wear and abuse
UPC: 042406187916

Shure RPM181/S Specs

General
Type
Condenser
Frequency Response
20 to 20,000 Hz
Polar Pattern
Supercardioid
Sensitivity
-49.5 dBV/Pa (2.5 mV)
Output Impedance
110 ohms (at 1 kHz)
Signal to Noise Ratio
71.5 dB
Self Noise
22.5 dB SPL-A
Common Mode Rejection
≥55 dB
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power Requirements
11-52 V DC[4] phantom power (IEC-61938)2.4 mA, maximum
Weight
5.1 oz (145 grams)
Maximum SPL
1000 Ohm Load
152.0 dB (1,000 ohm load)
2500 Ohm Load
154.5 dB SPL
Dynamic Range
1000 Ohm Load
129.5 dB
2500 Ohm Load
132.0 dB
Clipping Level
1000 Ohm Load
7.5 dBV
2500 Ohm Load
10.5 dBV

Shure RPM181/S Reviews

See any errors on this page?
Whatever You Need, We've Got It