Furman M-8Lx Merit X Series 8 Outlet Power Conditioner & Surge Protector - with Dual Rack Lights

Used Cat #3514769 • MFR #M-8LX
Print
Furman M-8Lx Merit X Series 8 Outlet Power Conditioner & Surge Protector - with Dual Rack Lights
This image is for illustrative purposes only
Used
Warranty: B&H 90 Days
In Stock
No Store Display
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $17.95

Furman M-8LX Overview

The Furman M-8Lx Merit X Series 8 Outlet Power Conditioner is a low-cost AC power solution for rack mount systems. Install an M-8Lx in the top slot of your rack, and the eight switched AC outlets in the rear panel will power up and protect all your equipment up to a 15A load. The M-8Lx also features an additional AC outlet on the front panel, and two pull-out light tubes for rack illumination, with dimmer control.

Merit X Series conditioners protect your delicate electronic equipment by combining high voltage varistor (MOV) surge and transient suppressors. The fast-acting suppression circuit quickly responds, and clamps transient voltages to safe levels. An RFI/EMI interference filter works to prevent noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of "electronic pollution" from contaminating the AC line, and from there leaking into sensitive audio, video, or computer circuits.

The M-8Lx features two slide out, swiveling light fixtures that provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.

The rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters.
A circuit breaker is provided on the rear panel. If the total load on the Power Conditioner (combining all outlets) exceeds the 15A (or 1800W limit), the circuit breaker will trip. It may be easily reset by pushing in a button.
A convenient master switch for the rear outlets which glows when the power is on. There is a separate "Rack Lights" switch for the lamps, plus a dimmer control knob which regulates the lamps' brightness.
Standard level filtration from radio frequencies and electromagnetic interference.
Operating Voltage: 90-140 VAC
UPC: 654061027942

Furman M-8LX Specs

Key Specs
Metering
None
Battery Backup
No
Outlets
8x NEMA 5-15R
1x NEMA 5-15R
Additional I/O
No
Surge Protection
Yes: 170 Joules
Input
1x 6' 14 AWG power cord with 3-prong plug
Output
8x rear panel 3-prong AC power outlets
1x Front panel 3-prong AC power outlet
Form Factor
Rackmount
Type
Conditioner
Surge Energy Rating
170 Joules
Noise Attenuation
Transverse mode: Greater than 26dB, 200 KHz to 10 MHz
Amp Rating
15 A
Audible Alarm
N/A
Number of Circuits
1
Metering
None
Compatibility
19" Rack system
Battery Backup
No
Agency Certifications
TUV, TUV-C
Dimensions
19 x 7.5 x 1.75" (48.3 x 19.0 x 4.5cm) WxDxH
Integrated Lamps
Yes
Weight
5.5 lbs (2.5kg)
Equipment Protection
None
Connections
Outlets
8x NEMA 5-15R
1x NEMA 5-15R
Wall Plug Type
NEMA 5-15P
Lamp I/O
No
Additional I/O
No
Wireless
No
Electrical
AC Input Power
120 VAC, 50 / 60 Hz
DC Output Power
Not Specified by Manufacturer
Load Capacity
Not Specified by Manufacturer
Sequencing Delay
Yes
Protection & Conditioning
Protection Types & Modes
Line to Neutral, Overvoltage, Undervoltage
Circuit Breaker
Yes: 15 A
Overvoltage Protection
> 130 V
Surge Protection
Yes: 170 Joules
EMI/RFI Noise Filtration
Traverse/Differential-Mode:
26 dB (200 kHz to 10 MHz)
Physical
Rackmount Size
1 U
Cable Length
6' / 1.8 m
Certifications
TUV
Wire Gauge
14 AWG
Material of Construction
Steel
Cable Management
No
Dimensions
19 x 7.5 x 1.75" / 48.3 x 19 x 4.5 cm
Weight
6 lb / 2.7 kg

Furman M-8LX Reviews

See any errors on this page?
Whatever You Need, We've Got It