Manley Labs Reference Cardioid Tube Microphone

Used Cat #3526285 • MFR #REFCARD
Print
Manley Labs Reference Cardioid Tube Microphone
This image is for illustrative purposes only
Key Features
  • Modern Tube Vocal Microphone
  • Cardioid Polar Pattern
  • Open Weave Stainless-Steel Grille
  • Hand-Wound Output Transformer
The Manley Labs Reference Cardioid (commonly known as REF-C) is a large-diaphragm tube microphone offering a wide, 10 Hz to 30 kHz frequency response and accurate transient performance without coloration or any perceivable sonic signature. The rich tonal balance and liquid character make this center-fixed cardioid mic an excellent choice for obtaining a very forward, immediate sound when recording acoustic guitars, drum overheads, saxophones, and especially pop vocals and voiceovers—with a "finished" sound right out of the box.
More Details
Used
Warranty: B&H 90 Days
In Stock
No Store Display
Free 2-Day Shipping

Manley Labs REFCARD Overview

The Manley Labs Reference Cardioid (commonly known as REF-C) is a large-diaphragm tube microphone offering a wide, 10 Hz to 30 kHz frequency response and accurate transient performance without coloration or any perceivable sonic signature. The rich tonal balance and liquid character make this center-fixed cardioid mic an excellent choice for obtaining a very forward, immediate sound when recording acoustic guitars, drum overheads, saxophones, and especially pop vocals and voiceovers—with a "finished" sound right out of the box.

The Reference Cardioid features a 1" gold-sputtered diaphragm that is 6 microns thick based on the vintage U47. It has the ability to withstand sound pressure levels up to 150 dB. The open-weave stainless steel grille allows the capsule to capture signals with zero-loss acoustical transmission, which translates to less dampening of high-frequency content.

The electronics of the Reference Cardioid include two triodes in cascade forming an entire gain-block. The dual-triode 12AX7 tube is easily obtainable and was chosen for its high gain and low noise properties. The audio signal and power connect from the microphone to the filtered B+ power supply via a single 30', 6-pin XLR cable. The audio output exits the power supply via 3-pin XLR through a custom-wound output transformer, which employs nickel laminations and "humbucking" bi-filar windings, all enclosed in mu-metal.

The REF-C features a proprietary suspension system that is attached to the black & red anodized casing. The capsule itself is mounted to a neoprene-rubber shockmount to prevent unwanted vibrations from being picked up by the diaphragm. Handmade in the USA, the microphone ships with a leather capsule cover, locking carrying case, and IEC power cable.

REF-C Modern Tube Vocal Microphone
1" diaphragm
Open weave stainless steel grille for zero-loss acoustical transmission
Neoprene-rubber shockmount
All-tube design with 12AX7 dual triode
-10 dB pad
150 dB maximum SPL
Filtered B+, regulated heater voltages
30' 6-pin XLR power cable
Hand-wound output transformer with nickel laminations and mu-metal casing
Precision suspension system
Leather capsule protector
Locking carrying case
UPC: 890833000298

Manley Labs REFCARD Specs

Key Specs
Microphone Type
Large Diaphragm / Tube
Polar Pattern
Cardioid
Element Type
Condenser
Controls
Pad
Frequency Response
10 Hz to 30 kHz
Maximum SPL
150 dB
Analog Output
1x XLR 3-Pin Male
Power Sources
External PSU
Capsule
Center-fixed large diaphragm capacitor
Microphone
Polar Pattern
Fixed cardioid
Diaphragm
Diaphragm Size: 1"; 1.25" overall
Diaphragm Thickness: 6 micron; gold sputtered
Microphone Type
Large Diaphragm / Tube
Frequency Response
10 Hz to 30 kHz
Maximum Input Sound Level
150 dB SPL at capsule
Sensitivity
17 mV/Pa
Polar Pattern
Cardioid
Amplifier Type
2 x Triode gain block Lo Z output
Element Type
Condenser
Tube Type
1 x 12AT7
Sound Field
Mono
Output Type
Transformer coupled
Output Polarity
Balanced XLR, pin 2 hot, pin 3 low
Diaphragm
1" / 25.4 mm
Distortion
Amplifier Distortion: < .05%
Orientation
Side Address
Controls
Pad
Amplifier Noise
-120 dB EIN (tube dependent)
Pad
-10 dB
Body Material
Black anodized aluminum
Power Supply
70 mA @ 120 VAC (8.4 W)
60 Hz
Fuse: 250 mA @ 120 VAC
Dimensions
Mic: 4.5 x 9.7 x 4.5" / 11.4 x 24.6 x 11.4 cm
PSU: 5.0 x 8.2 x 3.4" / 12.7 x 20.8 x 8.6 cm
Circuitry
Tube
Weight
Mic: 2.3 lb / 1.0 kg
PSU: 2.5 lb / 1.1 kg
Performance
Frequency Response
10 Hz to 30 kHz
Maximum SPL
150 dB
Sensitivity
17 mV/Pa
Equivalent Noise Level
-120 dB
Connectivity
Analog Output Connector
1x XLR 3-Pin Male
Cable Length
30' / 9.1 m
Power
Power Sources
External PSU
Operating Voltage
Not Specified by Manufacturer
AC Input Power (PSU)
90 to 250 VAC, 50 / 60 Hz
Physical
Color
Black
Dimensions
ø: 4.5 x L: 9.7" / 114.3 x L: 246.38 mm
Weight
1.5 lb / 0.7 kg (Microphone)

Manley Labs REFCARD Reviews

See any errors on this page?
Whatever You Need, We've Got It