QSC AD-S8T AcousticDesign Series 8" 2-Way 200W Surface-Mount Loudspeaker (Single, White)

Used Cat #3550939 • MFR #AD-S8T-WH
Print
QSC AD-S8T AcousticDesign Series 8" 2-Way 200W Surface-Mount Loudspeaker (Single, White)
This image is for illustrative purposes only
Key Features
  • 8" Woofer and 1" Exit Compression Driver
  • 200W RMS Power Handling
  • 105° Conical Coverage
  • 119 dB Peak Maximum SPL
The white AcousticDesign Series QSC AD-S8T is a transformer-equipped 8" surface-mount loudspeaker supplied with the award-winning X-Mount system, making it suitable for 70/100V or 8-ohm operation in a variety of foreground and background music applications, whether installed in horizontal, vertical, wall, or ceiling deployments.
More Details
Used
B&H Warranty: Limited 1-Year B&H Warranty
In Stock
No Store Display
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $79.95

QSC AD-S8T Overview

The white AcousticDesign Series QSC AD-S8T is a transformer-equipped 8" surface-mount loudspeaker supplied with the award-winning X-Mount system, making it suitable for 70/100V or 8-ohm operation in a variety of foreground and background music applications, whether installed in horizontal, vertical, wall, or ceiling deployments.

Outfitted with an 8" weather-treated woofer and a 1" exit compression driver with a DMT waveguide, the AD-S8T offers even 105° conical coverage and improved off-axis response while providing a frequency range of 55 Hz to 20 kHz (-10 dB). The speaker is capable of handling 200W RMS and producing a peak maximum SPL of 119 dB.

The AD-S8T utilizes a 4-pole Euroblock connector under a sealed input cover for easy wiring and protection from moisture. Featuring a rugged ABS enclosure and a powder coated aluminum grille, the AD-S8T boasts dust and splash resistance beyond IP54 ratings for worry-free operation indoors or outside.

Designed for foreground and background music sound reinforcement in restaurant, retail, audio visual, education, and large system ancillary support applications as well as in concourses, casinos, transportation terminals, and worship facilities
Supplied with award-winning X-Mount system to enable easy installation in horizontal, vertical, wall, or ceiling deployments at a variety of angles with no slippage over time
M10 fittings for YMS8 yoke mount or M10 Kit-C shoulder eyebolt accessories (both available separately) for installation versatility
8" weather-treated paper cone woofer with a 2" voice coil and a 1" exit, 1.4" compression driver that matches the sensitivity and performance of the woofer for optimal full-range reproduction
Consistent and even 105° conical coverage is achieved through DMT (Directivity Matched Transition), a QSC innovation which matches the directivity patterns of the woofer and the high-frequency waveguide at the crossover point, resulting in a coherent transition between transducers and improved off-axis response
Rugged ABS enclosure and powder coated aluminum grille
Exceeds IP54 ratings for dust and splash resistance
Low-saturation, low-loss 70/100V transformer with 8-ohm bypass
Rear-panel rotary tap selector is protected by a weather grommet
4-pole Euroblock connector with loop-thru wiring located under a sealed input cover to prevent moisture at the terminals
Advanced voicing filter sets using QSC Intrinsic Correction are available through either Q-Sys processing or CXD amplifier platforms (available separately)
UPC: 684284059482

QSC AD-S8T Specs

Key Specs
Active/Passive
Passive
Number of Included Speakers
1
Speaker Configuration
2-Way
Power Handling
For 2 Hours / At Low-Z:
200 W RMS
Constant Voltage / Transformer Taps
70 V
60 / 30 / 15 / 7.5 W or 8 Ohms Bypass
100 V
60 / 30 / 15 W or 8 Ohms Bypass
Impedance
8 Ohms (Transformer Bypassed)
HF Driver
1x 1" / 2.5 cm Compression Driver
LF Driver
1x 8" / 20.3 cm Paper Woofer
Frequency Range
55 Hz to 20 kHz -10 dB
Color
White
Frequency Range
55 Hz to 20 kHz
Speaker
Noise Power
200 W / 40 V (rms)
Sensitivity
90 dB SPL
Active/Passive
Passive
Number of Included Speakers
1
Coverage Angle
(-6 db): 105°
Directivity Factor
7
Directivity Index
9 dB
Speaker Configuration
2-Way
Power Handling
For 2 Hours / At Low-Z:
200 W RMS
Maximum Sound Pressure Level (SPL)
Continuous: 113 dB
Peak: 119 dB
Recommended Amplifier Power
400 W
Impedance
8 Ω
Recommended Amp Power
400 W
Constant Voltage / Transformer Taps
70 V
60 / 30 / 15 / 7.5 W or 8 Ohms Bypass

100 V
60 / 30 / 15 W or 8 Ohms Bypass
Transformer Taps
70 V: 60, 30, 15, 7.5 W and 8 Ω bypass
100 V: 60, 30, 15 W and 8 Ω
High Frequency Transducer
1" exit / 1.4" voice coil compression driver
Low Frequency Transducer
8" weather resistant paper cone woofer
Impedance
8 Ohms (Transformer Bypassed)
Transformer Wattage
60 W
Input Connector
Euroblock connector with parallel output terminals
Enclosure Type
Sealed
Weight
24.1 lb (10.9 kg)
Dimensions
17.3 x 10.0 x 9.9" (43.9 x 25.4 x 25.1 cm)
Drivers
HF Driver
1x 1" / 2.5 cm Compression Driver
HF Voice Coil
1.4" / 3.6 cm
LF Driver
1x 8" / 20.3 cm Paper Woofer
LF Voice Coil
2" / 5.1 cm
Performance
Frequency Range
55 Hz to 20 kHz -10 dB
Maximum SPL
113 dB (Continuous)
119 dB (Peak)
Sensitivity
90 dB SPL
Coverage Angle
105° (Conical)
Directivity
7 (Directivity/Q Factor)
9 dB (Directivity Index)
Connectivity
Inputs/Outputs
1x Block 4-Pole Speaker Input/Thru (Removable)
Physical
Environmental Resistance
Dust/Humidity/Water-Resistant (IP54)
Operating Conditions
-4 to 122°F / -20 to 50°C
Color
White
Mounting
1x Bracket Point (Rear)
2x M10 Suspension (Bottom)
Construction Material
ABS, Aluminum Grille, Polymer
Dimensions
17.3 x 10 x 9.9" / 43.9 x 25.4 x 25.1 cm
Weight
24.1 lb / 10.9 kg

QSC AD-S8T Reviews

See any errors on this page?
Whatever You Need, We've Got It