Cisco SGE2010P 48-Port Gigabit Switch: PoE

BH #CISGE2010P • MFR #SGE2010P
Print
Cisco SGE2010P 48-Port Gigabit Switch: PoE
Key Features
  • 48 10/100/1000 Ethernet Ports
  • IEEE 802.3af PoE Delivered to All Ports
  • 15.4W Power for PoE-enabled WAP/VoIP
  • Flexible Firmware Upgrade by Dual Images
The Cisco SGE2010P 48-Port Gigabit Switch: PoE helps keep your data safe and provides maximize system availability, with fully redundant stacking and dual images for resilient firmware upgrades. You can secure your network with the help of security features such as IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control lists (ACLs), denial-of-service (DoS) prevention and MAC-based filtering.

Enhanced features like quality of service and traffic-management help in ensuring clear and reliable voice and video communications. The Cisco SGE2000 includes a secure management interface through which you can take advantage of the comprehensive feature set for a better-optimized and more secured network.

For wireless or voice over IP (VoIP) deployments, the Cisco SGE2010P supports the IEEE 802.3af standard for Power over Ethernet. Automatic load sensing enables the circuitry to detect PoE on the end device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators to show power status. It provides 15W of available PoE power on up to 24 of the Gigabit Ethernet ports for powering PoE-enabled wireless access points or VoIP handsets. The maximum PoE available per device for all ports is 360W.

The Cisco SGE2010P provides resilient stacking for up to four units or 192 ports. A stack of units is managed as a single switch with one web management interface. The Cisco SGE2010P can coexist in a stack with the Cisco SGE2000 and SGE2000P 24-Port Gigabit Switches, and the Cisco SGE2010 48-Port Gigabit Switch, for a maximum of 192 ports in a stack. The stacking capability includes master/backup unit behavior, ring and chain architecture and hot insertion and removal of units.

The software running on the Cisco SGE2010P interacts with provisioning, management and security software on both the site's services router and the service provider's equipment. This interaction provides a simple, one-step installation and access to web-administered features for the administrator and users. Simple, affordable network operations throughout the network's lifetime are the result.

More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969
See any errors on this page?
Whatever You Need, We've Got It