Video Chat with a Photography Expert - Live

Sirui N-2004 4-Section Aluminum Tripod

BH #SIBSRN2004 • MFR #BSRN2004
Print
Sirui N-2004 4-Section Aluminum Tripod
Key Features
  • One Leg Unscrews to Become Monopod
  • Maximum Height of 65"
  • Load Capacity of 33 lb
  • Forged Aluminum Chassis
The Sirui N-2004 4-Section Aluminum Tripod is a great tripod for travelers and other adventurous photographers who need to pack light and reserve the option to, at a moment's notice, slim down their camera's support system to just a monopod. The N-2004 features a leg that unscrews and attaches to a second included mounting plate and, optionally, the tripod's removable center column, to form a monopod that ranges from 16.9" (collapsed) to 66.2" long (with the center column attached).

Reaching a maximum height of 65", the tripod itself is quite versatile in its own right – the N-2004 weighs just 3.5 lb but supports up to 33 lb thanks to its thick upper leg sections and forged aluminum construction. It's suitable for use with just about any head and any 35mm camera, DSLR, point & shoot, or camcorder.

The compact N-2004 tripod's legs fold upward 180° to achieve a relatively compact folded length of 18.1" – even with many camera head models attached. The entire package stays very compact to fit comfortably in most carry-on bags and many backpacks.

The tripod's center column is reversible, and the N-2004 comes with a short center column so that you can set up extremely close to the ground for ultra-low-angle shooting. With the short center column installed, you can set the legs at their wide angle (80°) and shoot from only 6.7" from the ground.

More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Sirui N-2004 Overview

The Sirui N-2004 4-Section Aluminum Tripod is a great tripod for travelers and other adventurous photographers who need to pack light and reserve the option to, at a moment's notice, slim down their camera's support system to just a monopod. The N-2004 features a leg that unscrews and attaches to a second included mounting plate and, optionally, the tripod's removable center column, to form a monopod that ranges from 16.9" (collapsed) to 66.2" long (with the center column attached).

Reaching a maximum height of 65", the tripod itself is quite versatile in its own right – the N-2004 weighs just 3.5 lb but supports up to 33 lb thanks to its thick upper leg sections and forged aluminum construction. It's suitable for use with just about any head and any 35mm camera, DSLR, point & shoot, or camcorder.

The compact N-2004 tripod's legs fold upward 180° to achieve a relatively compact folded length of 18.1" – even with many camera head models attached. The entire package stays very compact to fit comfortably in most carry-on bags and many backpacks.

The tripod's center column is reversible, and the N-2004 comes with a short center column so that you can set up extremely close to the ground for ultra-low-angle shooting. With the short center column installed, you can set the legs at their wide angle (80°) and shoot from only 6.7" from the ground.

Forged aluminum results in stronger components than the traditional casting process that's often used for tripod chassis. Forging leads to more compacted metal and enhances the integrity of metal grains so they remain consistent and continuous. This leads to a longer product life and better performance
An anodizing surface treatment, produced by an electrolytic oxidation process to increase the thickness of the natural oxide layer on the surface of metal parts, is applied to increase corrosion & wear resistance and surface hardness, and to enhance color durability
Minimal diameter difference between each leg section for greater overall stability
Silicone twist locks for leg stages
Anti-leg rotation system makes setup faster
Automatic leg-angle lock mechanism for speed and convenience – independently lock legs into place at three different angles: 23°, 52° & 80°
Short center column allows the tripod to reach extremely low positions – minimum height of 6.7"
An additional mounting plate attaches to the unscrewed monopod leg to mount a camera. A wrist strap is included for security in case the operator's grip slips
Leg warmer on the monopod leg facilitates handling in extreme weather conditions and helps protect it
Center column hook allows you to add a ballast for a sturdier setup in windy conditions
Reversible 1/4"-20 & 3/8"-16 screw on mounting plate enables the attachment of virtually any camera, camcorder, or head
Well-designed padded travel bag with sturdy shoulder strap for carrying

Sirui N-2004 Specs

Load Capacity
33 lb (15 kg)
Maximum Height
Tripod: 65" (165.0 cm)
Monopod: 66.2" (168.1 cm)
Maximum Height w/o Column Extended
Tripod: 54.7" (139.0 cm)
Monopod: 53.9" (137.0 cm)
Minimum Height
Tripod: 6.7" (17.0 cm)
Monopod: 16.9" (43.0 cm)
Folded Length
Legs reversed: 18.1" (46.0 cm)
Legs folded down: 20.9" (53.0 cm)
Weight
3.5 lb (1.6 kg)
Material
Aluminum
Head Attachment Fitting
1/4"-20 & 3/8" reversible
Leg Stages/Sections
3/4
Leg Lock Type
Twist lock
Diameter (Top Leg Section)
1.10" (28mm)
Independent Leg Spread
Yes
Spiked/Retractable Feet
Yes
Center Brace
No
Center Column Type
Rapid, reversible
Center Column Sections
1 (also includes short center column)
Bubble Level
No
Packaging Info
Box Dimensions (LxWxH)
21.5 x 5.3 x 5.7"

Sirui N-2004 Reviews

See any errors on this page?
Whatever You Need, We've Got It