Doubler Native from Waves is a plug-in for automatically creating a double-track effect, especially for vocals. Using adjustable delay and pitch modulation, the plug-in provides a rich texture on vocals, but works equally well on polyphonic instruments and full mixes.
Note:
Requires iLok if one is not already present on the system.
Main Features
Two plug-in components, two- and four-voice
Comprehensive controls for modifying the "doubles"
Delays and filters
Up to 24-bit/192 kHz resolution
Mono and stereo components
Controls
- Gain - -48 dB to 0 dB per voice and for the direct signal
- Pan - -45° to +45° per voice and for the direct signal
- Align - delays the direct signal according to the latency of the voices
- FB High-Pass Filter - 16 Hz to 21,357 Hz
- Range - 20 Hz or 80 Hz detune frequency boundary
- Modulation Reset - resets rate and depth values
- Delay - 0 ms to 100 ms per voice
- Feedback - 0% to 100% per voice
- Octave - on/off (shifts the voice one octave down)
- Detune - -100 to +100 cent
- Depth - -200 to +200 cent
- Rate - 0.1 Hz to 400 Hz
- Low Shelf Filter - -88 dB to +12 dB, 16 Hz to 21,357 Hz
- High Shelf Filter - -88 dB to +12 dB, 16 Hz to 21,357 Hz
- Output Gain Fader - -24 dB to 0 dB
- Output Meters - -30 dB to 0 dB, with peak hold and clip indicators
- In 1-3 - L, L+R, L-R, input signal for voices 1 and 3
- In 2-4 - R, R+L, R-L, input signal for voices 2 and 4