Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Video Chat with a Lighting Expert - Live
Key Features
- Chrome-Plated Steel Construction
- 5/8" Male Pin
- 5/8" Female Receiver
- T-Handle with Rubber Grip
This Heavy-Duty Swivel Pin from Impact adds articulation to your stand or boom. One end slips onto a male 5/8" pin while the other supports a light or accessory with a 5/8" receiver. The ball joint allows 180° swivel of the fixture, while the large, rubber-covered T-handle provides secure locking in your chosen position. The barrel at the receiver end measures 1 1/8". Removing the tightening knob from it allows you to drop it into a 1 1/8" receiver.
More DetailsSee any errors on this page?
What's the simplest, shortest way to adapt this ...
What's the simplest, shortest way to adapt this to a 1/4" threaded male screw in order to mount smaller LED lights, without adding excessive length?
The smallest adapter to a 1/4 20 would be a Rapid adapter. https://bhpho.to/2lAkR1d
Date published: 2020-03-19
Does the 5/8 pin have a threaded hole in the end? ...
Does the 5/8 pin have a threaded hole in the end? What size?
No hole!
Date published: 2021-12-23
The baby drop down pin seems to have a deeper ...
The baby drop down pin seems to have a deeper mounting point than this swivel adapter - if using on a boom is there a downside to this?
Hello, I use this with a boom and don't have a problem.. the attachment is secure.
Date published: 2020-10-09
question
Will my elinchrom D-Lite 400W/s RX 4 Flash Head fit on easily? I bought the Impact 6.0 Pin with Collar , but my elinchrom does not fit onto it properly.
The original pin Impact 6.0 Pin with Collar, should of fit fine. You might have needed to make sure the screw on the flash is unscrewed enough.The Swivel pin should work as well. The flash fits on a 5/8 stud and both items are 5/8.
Date published: 2018-08-28
question
how can you mount a dsrl camera on it?
You can use a Impact camera plate https://bhpho.to/2LlHJxp.
Date published: 2019-07-29
Am I able to attach this to the end of my Impact C
Am I able to attach this to the end of my Impact C-stand boom arm?
The Impact Heavy-Duty Swivel Pin (B&H# IMSRP118) has a standard 5/8" receiver that may be used to attach it to one end of the boom of the Impact 40" C-Stand with Turtle Base and Grip Arm Kit (40", Chrome) (B&H# IMLSCTB40SK).
Date published: 2026-04-10
What is the load capacity?
What is the load capacity?
I positioned the baby swivel pin at a 90 degree angle to the vertical and tightened the locking handle as tight as I possibly could by hand. I then hung about 27 pound of sandbags on the baby pin before it started to drift from the set position. The swivel is a ball and socket friction lock and the rigidity is mainly dependent on tightness. The one I used was new out of the box and I expect it to decline with age. The swivel pin came with no literature as to s
Date published: 2023-04-05
Can the male pin be removed and replaced with a ...
Can the male pin be removed and replaced with a baby pin? Strobes with modifiers tend to rotate down when not affixed to a pin with notches for the screw to snug into.
It is a baby pin. It is not removable.
Date published: 2021-01-12