Holiday Kickoff

Video Chat with a Pro Audio Expert - Live

Datavideo HP1 Single-Ear Headset for ITC Intercom Systems

BH #DAHP1 • MFR #HP1
Print
Datavideo HP1 Single-Ear Headset for ITC Intercom Systems
Key Features
  • Reference Quality, Closed-Ear Monitors
  • High Gain Before Feedback
  • Soft, Circumaural Earpad
  • Noise Cancelling Microphone
The Datavideo HP1 Single-Ear Headset is compatible with Datavideo ITC Intercom Systems. It features a closed-back design to reduce outside noise, a soft circumaural earpad and a noise-cancelling microphone. The headphone speaker resists clipping during loud monitoring.
More Details
In Stock
No Store Display
Free Delivery: Wed, Nov 25
to
Protect Your Gear
Add a protection plan from $11.99
Ask an Expert
800-606-6969

Datavideo HP-1 Overview

The Datavideo HP1 Single-Ear Headset is compatible with Datavideo ITC Intercom Systems. It features a closed-back design to reduce outside noise, a soft circumaural earpad and a noise-cancelling microphone. The headphone speaker resists clipping during loud monitoring.

UPC: 672255003862

Datavideo HP-1 Specs

System
Number of Included Headsets
1x Single-Sided Headset
Headphone
Earpiece Design
Over-Ear (Circumaural)
Earpiece Connection / Wearing Style
Headband
Number of Earpieces
Single Earpiece
Sound Field
Mono
Driver Type
Dynamic
Impedance
24 Ohms
Controls/Microphone Location
Right Earpiece
Frequency Response
10 Hz to 22 kHz
Total Harmonic Distortion (THD)
0.2%
Microphone
Type
Condenser
Mic Boom Location
Right Side
Pickup Pattern
Omnidirectional
Noise Cancelling
No
Frequency Response
20 Hz to 16 kHz
Sensitivity
-64 dB
Maximum SPL
98 dB
Impedance
2.2 Kilohms
Wired Connectivity
Wired Audio Connector
1x 1/8" / 3.5 mm
Audio Connector to Earpiece
Hard-Wired
Cable Length
Not Specified by Manufacturer
Physical
Environmental Resistance
No
Packaging Info
Package Weight
1.195 lb
Box Dimensions (LxWxH)
12.7 x 9.3 x 4.4"

Datavideo HP-1 Reviews

Despite a 3.5mm jack, wired to ONLY work with OEM hardware

By Tom
Rated 3 out of 5
Date: 2021-02-19

I was looking for a one-ear, over-ear solution with a good mic for a call center type office application, and gaming headsets were wither too cheap or too gamer looking to be acceptable. I found these and picked them up, only to find out they've wired the poles on the TRS for the Tip (which is normally left audio) to be Mic. I initially was going to return these, but decided to mod them since I could not find anything suitable that wasn't outrageously expensive. After rewiring the 3 pole to a standard 4 pole TRRS that works with PC and mobile, I was able to use it perfectly in the office. So why the 3 stars? I knocked one star for the proprietary plug when it didnt have to be, and another for comfort. Initially, these look very comfortable, but after an hour or two I began to get earaches for two reasons. The circular ear cups on the driver were just a bit too small internally (40mm) causing my ears to still be pressed in by the headset (Clamping force!!!) so I bought a cheap universal replacement pad on Amazon that was wider on the inside (55mm) as well as thicker (30mm vs 20ish) which has alleviated all ear discomfort. The other are was the other side of the headband; the pad on the head rest is just a very firm foam pad which does little to alleviate or spread out the pressure this headset causes. Again, another cheap stick-on earpad meant for the headband of a different headset fixed the issue. Those issues aside, the headset sounds very good and the microphone is good quality, and the build quality is also VERY good. My one minor complaint is that the ear cups only rotate 90º instead of 180, so when they rest on your neck the driver only faces outward, while I prefer to have it face inward if possible. There is also no dedicated mute button, but again, proprietary use. Hopefully the clamp force will get reduced with more use (I've only bene using it for about two to three weeks)

Durable headset

By Mark
Rated 5 out of 5
Date: 2014-02-04

I opted for the more durable headsets rather than the ones that come with the beltpacks. These seem as if they will withstand daily student use.

See any errors on this page?

What is recommended adaptor to a iPhone 3.5mm, I ...

What is recommended adaptor to a iPhone 3.5mm, I bought a trs to TRRS but looks like the pinout was incorrect
Asked by: Jason
This is not compatible with smartphones, it is intended to be used with Datavideo ITC systems.
Answered by: John
Date published: 2019-05-27

Need a recommended adaptor for a hp1 datavideo ...

Need a recommended adaptor for a hp1 datavideo headset to iPhone 3.5mm ? I bought TRS to TRRS adaptor but pin out was incorrect
Asked by: Jason
This headset is intended for use with Datavideo ITC systems and will not work with a phone.
Answered by: John
Date published: 2019-05-28

I was googling xbox one one ear cup headsets and ...

I was googling xbox one one ear cup headsets and this headset popped up. Is it compatible?
Asked by: Lionel
This headset is not deigned for XBOX use. Here is a recommendation for a single sided headset for XBOX- https://www.bhphotovideo.com/c/product/1502020-REG/microsoft_s5v_00014_xbox_one_chat_headset.html
Answered by: Daniel
Date published: 2020-06-10

Is it possible to work on computers for ...

Is it possible to work on computers for videoconferences, for instance?
Asked by: Alexandre Nuno
As long as your computer has a 3.5 mm audio input this will work great.
Answered by: Jose
Date published: 2021-02-19

Does it only work with ITC-100 or is it possible ...

Does it only work with ITC-100 or is it possible to use with other systems?
Asked by: Jan
Yes, you can use the HP-1 headset with other systems that require a compatible 3.5mm connector for the mic and headphones.
Answered by: Lisa S
Date published: 2019-03-19

I have two HP-1s with the piece that goes over ...

I have two HP-1s with the piece that goes over the head broken. Can I order replacements?
Asked by: Ward
We sell replacement earpads, but other parts should be ordered by the manufacturer.
Answered by: Steven M
Date published: 2019-06-13

I have two HP-1 headsets with the piece that goes ...

I have two HP-1 headsets with the piece that goes over the head broken. Can I purchase replacements?
Asked by: Ward
We do not carry replacement headbands for the HP-1, but you may be able to get them directly from Datavideo: 562-696-2324
Answered by: John
Date published: 2019-05-28
  • y_2026, m_11, d_19, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.50
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_867320, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It