The TDM Renaissance MAXX Bundle from Waves is a collection of plug-ins that are designed to emulate the warmth of analog vintage gear. The bundle includes the Renaissance Axx, Renaissance Bass, Renaissance Channel, Renaissance Compressor, Renaissance DeEsser, Renaissance EQ, Renaissance Reverb, Renaissance Vox, IR-L Convolution Reverb, and the Waves Tune LT plug-ins. They support TDM, RTAS, Audio Suite, AU, and VST plug-in formats on both Mac and PC.
Please note: This bundle is an electronic download.
The Renaissance Axx TDM from Waves is a dynamics plug-in engineered especially for guitar and bass. Settings can be dialed in very easily via a three-parameter interface that includes a fixed ratio curve, automatic release value, and an output limiter to prevent clipping.
- Threshold: -60 dB to 0 dB
- Input Meter: -60 dB to 0 dB
- Attack: 0 ms to 50 ms
- Attenuation Meter: 0 dB to -30 dB
- Output Gain Fader: -30 dB to 0 dB
- Output Meter: -60 dB to 0 dB with peak hold and clip indicators
- Clip-Guard Output Limiter
The Renaissance Bass TDM from Waves is a bass enhancement plug-in that features the company's MaxxBass psycho-acoustic technology. Tightening up the bass component of mix, or any material for that matter, has never been easier, while at the same time providing the ability to extend the perceived bass depth by up to 1.5 octaves without stressing the speaker system.
- Frequency Cutoff: 32 Hz to 256 Hz
- In/Out: adds or removes the original bass from the output signal
- Original Bass Meter: -30 dB to 0 dB
- Harmonic Intensity: -24 dB to +24 dB
- Harmonics Meter: -30 dB to 0 dB
- Output Gain Fader: -30 dB to 0 dB
- Output Meter: -30 dB to 0 dB with numeric peak hold and clip indicators
Renaissance Channel TDM from Waves is a channel strip plug-in that features equalization, compression, limiting, and gating in a single convenient interface. Borrowing processors from the company's Renaissance line of plug-ins, the channel strip can easily function both during tracking, and for mixing.
- EQ On/Off: switch per band and for the EQ module
- Filter Type: bell, resonant low/high shelf, low/high pass
- Gain: -18 dB to +18 dB per band
- Frequency: 16 Hz to 21,357 Hz per band
- Q: 0.26 to 6.50 per band
- Frequency Band Marker: graphic control over frequency and gain per band
Gate/Compressor Sidechains
- Source: internal, pre-EQ or external
- On/Off: filter activate
- Filter Type: hi pass, band pass, low pass and band reject
- Frequency: 16 Hz to 21,357 Hz
- BW (Q): 0.10 to 8.00
- Listen: monitor the sidechain signal
- Energy Meters: displays the sidechain signal level, integrated threshold control
Compressor/Expander
- RVox or RComp: dynamic behavior
- On/Off: switch
- Threshold: -60 dB to +18 dB
- Ratio: 0.50:1 to 50.0:1
- Attack: 0.00 ms to 500 ms
- Release: 5.00 ms to 5,000 ms
- ARC: manual or auto
Expander/Gate
- Gate or Exp: dynamic behavior
- On/Off: switch
- Threshold: -inf. to +18 dB
- Floor: -inf. to 0 dB
- Release: 10 ms to 5,000 ms
Routing Switch: EQ>dynamics, dynamics>EQ
Overall Attenuation Meters: -inf. to +6 dB
Output Gain Fader: -30 dB to +30 dB
Clip-Guard Output Limiter
Output Meter: -30 dB to 0 dB with peak hold and clip indicators
Phase Inversion Switch
Rotation: -45° to +45°
The Renaissance Compressor TDM from Waves is a compressor plug-in that features two compression modes, vintage opto and modern electro compression. Featuring a streamlined interface, the plug-in utilizes technologies from both the company's renowned C1 Parametric Compander, along with the L1 Ultramaximizer.
- ARC: Automatic Release Control or manual
- Compressor Behavior: opto or electro
- Character: warm or smooth
- Input Meter: -60 dB to 0dB with peak hold indicators
- Threshold: -60 dB to 0 dB
- Ratio: 0.50:1 to 50.00:1
- Attenuation Meter: -20 dB to +6 dB with peak hold
- Attack: 0.5 ms to 500 ms
- Release: 5 ms to 5000 ms
- Output Gain: -30 dB to +30 dB
- Output Meter: -60 dB to 0 dB with peak hold and clip indicators
- Clip-Guard Output Limiter
The Renaissance DeEsser TDM from Waves is a plug-in used to reduce excess sibilance ("ess" and "shh" sounds) from vocal tracks. A state-of-the-art sibilance attenuator reduces undesirable high frequencies while preserving the integrity of the source.
A variety of presets for both male and female voices, along with the functionality of audio or side-chain monitoring, make it easy to spot problem areas and clean them up with accuracy and ease.
- Frequency: 2 kHz to 16 kHz
- Filter Type: high-pass or band-pass
- Compression Mode: split or wideband
- Range: 0 dB to -48 dB
- Threshold: 0 dB to -80 dB
- Monitor: audio or sidechain
- Output Meter: -40 dB to 0 dB with peak hold and clip indicators
The Renaissance Equalizer TDM from Waves is a paragraphic EQ plug-in that features real-time EQ graphing, vintage-modeled filter curves, and extended internal headroom.
Three versions are available covering 2, 4 or 6 bands of equalization and because of the filter curves, the plug-in is able to deliver a "warm" analog processing to any audio source.
- Gain: -18 dB to +18 dB per band
- Frequency: 16 Hz to 21,357 Hz per band
- Q Factor: 0.26 to 6.5 per band
- Filter Types: asymmetric bell, resonant high/ low-shelf, high/ low-pass, per band
- In/Out: switch per band
- Frequency Band Marker: graphic control over frequency and gain per band
- Output Gain Fader: -24 dB to +12 dB
- Output Meter: -30 dB to 0 dB with peak hold and clip indicators
- Trim: output gain adjustment
- Link: left+right, left or right
The Renaissance Reverb TDM from Waves is a reverb plug-in that features the classic rich reverb tails of high-end hardware, while delivering precision control over all aspects of reverb simulation.
The software provides an advanced early reflection system, and dual-band EQ and damping controls. An interesting feature of the early reflections is the ability to input negative values, thus delaying the dry signal. This can create an interesting bloom effect before the onset of the dry signal.
- Low Freq: 16 to 1,600Hz
- Low Ratio: 0.10 to 2.00
- High Freq: 1,000 to 21,000Hz
- High Ratio: 0.10 to 2.00
- Frequency Band Marker: graphic control over frequency and ratio per band
EQ Controls
- Low Freq: 16 to 1,600Hz
- Low Gain: -24 to +12dB
- High Freq: 1,000 to 21,000Hz
- High Gain: -24 to +12dB
- Frequency Band Marker: graphic control over frequency and gain per band
Universal Controls
- Decorrelation Variation: 0 to 6
- Pre-delay: -160 to +160ms
- Time: 0.1 to 20 seconds
- Size: 1 to 100
- Diffusion: 0 to 100
- Decay: 0.04 to linear
- Early Reflections: off to 0dB
- Reverb: off to 0dB
- Wet/Dry: 0 to 100% wet
- Gain: -24 to 0dB
- Output Meter: -30 to 0dB with peak hold and clip indicators
Renaissance Vox TDM from Waves is a plug-in that provides dynamics control optimized for vocals. The interface features simple, streamlined controls for compression, gate/expansion, limiting, and level maximization. With a few adjustments, vocals can take on a vivid and smooth sound.
- Gate Threshold: -inf. to 0 dB
- Input Energy Meter: -80 dB to 0 dB with peak hold indicators
- Gain Reduction: 0 dB to -36 dB
- Attenuation Meter: -36 dB to 0 dB
- Output Gain: -36 dB to 0 dB
- Output Meter: -40 dB to 0 dB with peak hold indicators
- Clip-Guard Output Limiter
IR-L Native from Waves is a convolution based reverb plug-in that is capable of recreating the sound of real acoustic spaces. Over 100 impulse responses are provided, editable via the easy and efficient streamlined interface.
Unlike some convolution reverbs that deliver a static response, the IR-L has the ability to extended the RT60 decay time by up to four times while still preserving the reverb's envelope and frequency content.
- CPU Mode: Full CPU or Low CPU
- Latency: shows the current latency in ms
- Dry: 0 mS to 30 mS delay of the dry signal
- Dry/Wet: 0% to 100%
- Crosstalk: 0 to 100 (IR-L Efficient module only)
- Direct: on/off
- Direct Pre-delay: 0 mS to 500 mS
- Output Gain Fader: -50 dB to 0 dB
- Output Meter: -30 dB to 0 dB with peak hold and clip indicators
IR Graph
- Gain and Time: -90 dB to 0 dB, 0s to 10s
- Zoom: in and out on the time axis
- Zoom Reset: defaults to 6s display
Reverb Time Section
- Convolution Start: 0s to 1s
- Convolution Length: 0s to 6s
- RT60 Indicator: 0.1s to 10s
- Ratio: 0.25 to 1.00
Waves Tune LT Native is a special edition of Waves Tune using an intuitive interface, and simplified controls. Like its big brother, it offers easy to use pitch/formant correcting with an exceptional level of sound quality and transparency.
Waves Tune LT will automatically tune a vocal track, making the changes as gentle or as aggressive as required, using default parameters or custom settings. Selecting the root note and scale allows the plug-in to correct to the notes in that key. In addition to dozens of preset scales, custom scales can be created.
- Reference Pitch: 220 Hz to 880 Hz
- Formant: Corrected/Non-Corrected
- Pitch Shift Meter: -100 cents to 100 cents
- Timeline and Display Preferences Menu
- Piano Roll: 2 octave display
- Select All
- Clear Selection
- Auto Scrolling On/Off
- Horizontal/Vertical Zoom
- Reset Zoom
- RootNote: Semi-tone Scale
- Scale: 43 Pre-defined presets
- Note
- Zoom
- 2 levels
- Speed: 0 mS to 800 mS
- NoteTransition: 0 mS to 800 mS
- Ratio: 0% to 100%
