Please update your browser to take advantage of the latest technology security enhancements to ensure your B&H Shopping experience is as safe as it is enjoyable:
The Sennheiser KA 600 is a 40cm XLR female to 1/8" TRS male coiled connection cable.
UPC: 615104233720
Sennheiser KA 600 Reviews
Perfect fit
By James
Rated 5 out of 5
Date: 2025-12-29
Perfect fit to microphone and camera
Wireless Boom
By Bradley
Rated 5 out of 5
Date: 2025-01-30
Essentially picked this up to try out a wireless Boom mic set up. Works fine for its purpose.
See any errors on this page?
question
Can I use this to connect my AKG P220 to my Canon t5i? Will the t5i provide enough power for my mic?
Asked by: Anonymous
t5i has enough power for this. As long as your AKG has the male port for the cable's female connector.
Answered by: Ayehlaphyu M.
Date published: 2018-08-28
can I use this for sennheiser mke600 to connect ...
can I use this for sennheiser mke600 to connect and record audio on my bmpcc6k pro camera?
Asked by: Hayk
Yes, the Sennheiser KA 600 cable will work with most cameras with a 3.5mm microphone input. However, since this cable will not provide the MKE 600 or any other microphone with phantom power, the microphone will need to be running on battery power.
Answered by: Calvin M
Date published: 2022-05-30
Will this cable work with a Sennheiser wireless ...
Will this cable work with a Sennheiser wireless mic?
Asked by: Lee
It will most likely work. However for 100% compatibility, please consider the Sennheiser CL2 Cable Item# SECL2
Answered by: Marty
Date published: 2019-02-14
Hello! I want to attach a Rode Go transmitter via ...
Hello!
I want to attach a Rode Go transmitter via velcro to the XLR connector, and attach to a shotgun mic to allow more flexibility. Will the cable and connector shielding block errant 2.4Ghz transmission with it so close? Thanks -- Sennheiser support doesn't seem to offer direct-consumer support but you all do a great job with Q&A!
Asked by: Ron
That should work, assuming the shotgun you are using does not need phantom power. The RODE will only provide plug in power
Answered by: James Cruz
Date published: 2021-04-05
Will this cable work with pc or laptop?
Will this cable work with pc or laptop?
Asked by: Darko
No, the Sennheiser KA 600 - XLR Female to 1/8" TRS Male Connection Cable is not intended to work with computers or mobile devices. It uses a 3.5mm TRS connector, and computers/mobile devices require TRRS.
Answered by: Calvin M
Date published: 2023-09-15
The length is described as 15 inches or 40cm. Is ...
The length is described as 15 inches or 40cm. Is the length when the coil is gently stretched to its maximum? What is the length when not pulled?
Asked by: John
The length is 10" at rest. You can stretch it to 18", but 15" falls within the design parameters.
Answered by: Terrence
Date published: 2022-10-06
Would this cable work for taking a mono mix mic ...
Would this cable work for taking a mono mix mic level output and feed it into a wireless transmitter XLR input?
Thanks
Asked by: luis
Yes, this cable would be suitable for the described purpose.
Answered by: Calvin M
Date published: 2022-08-29
ng1 w/ sony a7sii will it work?
ng1 w/ sony a7sii will it work?
Asked by: Percell
A Rode NTG-1 mic requires phantom power, so this cable will not work connected directly out of the mic to a Sony a7III camera. The mic would require a device, such as the Saramonic SR-PAX1 Two-Channel Audio Mixer, Preamp, Microphone Adapter, BH #SASRPAX1, which will come with a 3.5mm mic level cable, and power up to two XLR microphones.