SmallRig Articulating Rosette Arm (11", Bumblebee Edition)
- Adjustable Ball Heads on Both Ends
- 1/4"-20 Screw on Each End
- Measures 11" Long, Large Locking Lever
- 6.6 lb Load Capacity
SmallRig Universal Power Bank Mounting Kit
- Universal Power Bank Holder
- Super Clamp with Magic Arm
- Fits Power Bank from 2.1-3.2" Wide
- Clamp Fits 0.4-2.3" Diameter, 1.9" Thick
Noga NF9038CA CineArm NF (Small)
- 3-Joint Mounting Arm
- Kip Lever-Based Central Mechanism
- Horizontal / Vertical Adjustment Support
- Tilt Movement Supported
SmallRig Mini Magic Arm with Universal Ball Heads
- Rotating Mini Ball Heads on Both Ends
- 11 lb Maximum Load, 4.3" Total Length
- 1/4"-20 Mounting Screw on Each End
- Anti-Scratch & Anti-Twist Rubber Pads
Dinkum Systems ActionPod
- For Small Cameras with 1/4"-20 Thread
- Eliminates the Use of Tripods
- Single 5-Link Length-Adjustable Arm
- Flexible Micro Adjustments
SmallRig Rosette Arm (11")
- Adjustable Ball Heads on Both Ends
- 1/4"-20 Anti-Twist Screw on Each End
- Measures 11" Long, Large Locking Lever
- 6.2 lb Maximum Load
Impact 2 Section Double Articulated Arm without Camera Bracket
- Aluminum Construction
- Extendable Sliding Arm
- 24.5" Long
- Supports 11 lb
SmallRig Articulating Arm with Dual Ball Heads (1/4"-20 Screws)
- Adjustable Ball Heads on Both Ends
- 1/4"-20 Mounting Screw at Each End
- 5.5" Long
- Load Capacity: 3.3 lb
Falcam F22 Dual-Head Quick Release Magic Arm Kit
- Two Quick Release Mount Ball Heads
- Two F22 Quick Release Baseplates
- 1/4"-20 Threads, Quick Release Buttons
- 360° Rotation
Tether Tools Rock Solid Master Articulating Arm
- Three Articulating Joints
- Two Rotating 5/8" Ball Joints
- Center Elbow Rotates 360°
- Center Knob Loosens All Joints
Wooden Camera Mini Universal Ultra Arm (Combo 1/4-20 & 3/8-16)
- 2 x Points of Articulation
- Interchangeable Mounting Knobs
- Removable Anti-Twist Pins
- Compatible 25mm Ball System
Manfrotto 244 Micro Friction Arm
Wooden Camera Universal Ultra Arm with Combo 1/4-20 & 3/8-16 (5")
- 4 Points of Articulation
- Interchangeable Mounting Knobs
- Removable Anti-Twist Pins
- 1/4"-20 and 3/8"-16 Center Threads
Manfrotto 244MINI Friction Arm
Ulanzi R102 Double Ball Head Magic Arm with 1/4"-20 Screws
- 3.5" Magic Arm
- Dual Ball Heads Tilt 180°
- Two 1/4"-20 Screws
- 2.2 lb Load Capacity
CAMVATE Super Clamp & 3.5" Arm with Dual 1/4"-20 Ball Head Mounts
- Mounts 1/4"-20 Thread Accessory
- 3.5" Arm with Dual Mini Ball Heads
- 1/4"-20 Screw on Each End
- Maximum Clamp Opening: 1.6"
CAMVATE Flexible Gooseneck Arm with Heavy-Duty C-Clamp
- Heavy-Duty C-Clamp
- Flexible Gooseneck with 1/4"-20 Screw
- 0.1 to 1.65" Clamping Range
- Multiple 1/4"-20 and 3/8"-16 Threads
CAMVATE Super Clamp with 5.8" Magic Arm
- Super Clamp with 5.8" Articulated Arm
- Mounts 1/4"-20 or 3/8"-16 Accessory
- Supports up to 8.8 lb
- 0.4 to 2.1" Clamp Opening Range
iFootage LT2-3.5 Spider Crab Magic Arm (5.5")
- 5.5" Articulating Arm for Attachments
- Shoe Adapter on One End
- 1/4"-20 Screw Mount on Other End
- Mount Light, Monitor, Camera
Axler AA-11 Recodo Articulating Arm (11")
- Three Points of Articulation
- Unfolds to 11" Long
- Metal Construction
- Supports 6 Pounds
Dinkum Systems Clamp-to-Clamp
- For Surfaces 1 to 2" Thick
- 7" Length with 1" Clamp and 2" Clamp
- A Multitude of Uses
MID49 TWIST Ball Monitor Mount with 1/4"-20 and 3/8"-20 Spuds
- Two 1" TWIST Ball Mounts
- 1/4"-20 Spud and 3/8"-16 Spud
- Two Variable-Friction 15mm Rod Clamps
- Variable-Friction Speedball Clamps
Bright Tangerine Titan Arm 2 (3/8"-16 to 1/4"-20, London Fog Black)
- Gradient Locking Adjustment Cine Arm
- 11 lb Load Capacity, 11" Length
- Interchangeable End Mounts
- 3/8"-16 to 1/4"-20
Noga MG9038CA CineArm MG (Large)
- 3-Joint Mounting Arm
- Kip Lever-Based Central Mechanism
- Horizontal / Vertical Adjustment Support
- Tilt Movement Supported
Ultralight CAK-VS38-05 Cinema Arm Kit
- 1/4"-20 and 3/8"-16 Male Threads
- One 5" Double Ball Arm
- Type III Black Anodized 6061 T6 Aluminum
- Stainless Steel Mounting Threads
Ultralight CAK-VS14-05 Cinema Arm Kit
- 1/4"-20 Male Threads
- One 5" Double Ball Arm
- Type III Black Anodized 6061 T6 Aluminum
- Stainless Steel Mounting Threads
Bright Tangerine Titan Arm 2 Ti with 3/8"-16 Anti-Twist to 1/4"-20 Anti-Twist Mounts (London Fog Black)
- Gradient Locking Adjustment Cine Arm
- Titanium-Reinforced Construction
- 3/8"-16 Anti-Twist Mount on One End
- 1/4"-20 Anti-Twist Mount on One End
Bright Tangerine Titan Arm 2 (3/8"-16 Anti-Twist to NATO, Tangerine)
- Gradient Locking Adjustment Cine Arm
- 11 lb Load Capacity, 11" Length
- Interchangeable End Mounts
- 3/8"-16 Anti-Twist to NATO
Learning About Articulating Camera Arms
Articulating arms improve comfort for video technicians, by offering a hands-free monitor viewing experience. Articulating monitor arms have various load capacities to give options for heavier camera and video equipment. Use production monitor mounting brackets and heavy-duty arms for lighting and audio equipment. Mount smaller lights, microphones, audio recorders, and other camera and video accessories from miniature arms for improved flexibility during your productions.
Mounting Equipment for Articulating Arms
Monitor arms can mount to cameras, tripods, C-stands, and other compatible production equipment. Using professional video monitor rackmounts and swing arms offers better coverage, as the arms may have 360-degree joint rotation. Heavy-duty articulating arms have adjustable arm length that easily changes to offer greater reach for audio and video equipment. Some monitor arms mount with clamps or clips, while others use accessories such as shoe mounts and 1/4 to 20" adapters and screws. For quick equipment and arm adjustments, use non-screwing arms with quick-release mechanisms.
Choosing Monitor Extension Arms
Swing arms are easy to move horizontally and vertically for increased mobility and range of audio or visual equipment. Heavy-duty arms can hold larger gear steady without bending under the extra weight. Articulating arms have flexible end joints that can pivot at a 90-degree angle for increased function on production sets. Single-point locking mechanisms provide stable support for your equipment and monitor arms. Ratcheting joints provide more security against arms swinging or moving if bumped. Use easily adjustable, three-point ratcheting arms with locking levers for expanded stability. Get steady shots from multiple angles with monitor arms in different sizes and styles.
B&H Photo and Video supplies articulating swing, magic, heavy-duty, and friction arms for a hands-free monitor viewing solution. Browse a large selection of cameras, camcorders, tripods, arms, and other professional video production equipment and accessories.


