Novagrade Digiscoping Adapter for Canon DSLR Cameras

BH #NOUA00CA01 • MFR #UA-00CA-01
Print
Novagrade Digiscoping Adapter for Canon DSLR Cameras
Key Features
  • Works with Eyepieces from 39 to 60.75mm
  • Anodized Aluminum Shell
  • Polymer Compression Ring
  • Protective Glass Filter
The Novagrade Digiscoping Adapter allows for the pairing of scopes and binoculars with a Canon DSLR camera. It also features an anodized aluminum shell and a polymer compression ring system for securely and accurately sliding onto the scope. Additionally, a clear glass filter with a double-sided anti-reflection coating keeps dirt and water away from your camera's delicate electronics.
More Details
In Stock
No Store Display
$129.00
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $19.99
Compatibility
Ask an Expert
866-264-7509

Novagrade UA-00CA-01 Overview

The Novagrade Digiscoping Adapter allows for the pairing of scopes and binoculars with a Canon DSLR camera. It also features an anodized aluminum shell and a polymer compression ring system for securely and accurately sliding onto the scope. Additionally, a clear glass filter with a double-sided anti-reflection coating keeps dirt and water away from your camera's delicate electronics.

Included with the adapter are 6 compression rings and an end stop extension. This allows for compatibility with optics featuring eyepieces with diameters of 39 to 60.75mm.

UPC: 859898003033

Novagrade UA-00CA-01 Specs

Compatibility
Canon
Dimensions
3.0 x 2.7 x 2.7" / 7.6 x 6.9 x 6.9 cm
Weight
6.1 oz / 172.4 g
Packaging Info
Package Weight
0.51 lb
Box Dimensions (LxWxH)
4.45 x 4.3 x 4.3"

Novagrade UA-00CA-01 Reviews

Did not meet my needs

By Robert
Rated 1 out of 5
Date: 2022-04-06

I have made many very good purchases from B&H over the years, but the Novagrade Digiscoping Adapter was not one of them. The basic problem is that I just can't get focused pictures with it in combination with my Canon camera and Vortex spotting scope. At B&H's recommendation, I subsequently purchased a different product which does allow me to get photos that are properly focused.

It Works but not stable

By JWeng
Rated 3 out of 5
Date: 2018-01-30

It works with Canon DSLR, the fit is not stable, it might be ok for a short video clip, not possible for a decent still shot.

See any errors on this page?

question

Will this work for any canon dslr? I have a canon dslr 70d will this fit it?
Asked by: Anonymous
Yes this Adapter is for EOS Mount. So it will work with your 70D.
Answered by: Alex S.
Date published: 2018-08-25

Can it be used with the Canon M50?

Can it be used with the Canon M50?
Asked by: Wolfram
This Model is for EOS Mount. So you would need the Canon EF-M Lens Adapter Kit for Canon EF / EF-S Lenses to use it on this Model.
Answered by: Alex S
Date published: 2020-11-29

If you remove the camera lens, and are solely ...

If you remove the camera lens, and are solely using the spotting scope, how do you set aperture and f stop?
Asked by: Wiley
There is only (1) aperture setting and that is the aperture of the scope. You have to control the amount of light by increasing or decreasing the shutter speed.(Shutter Priority
Answered by: John
Date published: 2021-04-01

Is it possible to connect the Zeiss Conquest ...

Is it possible to connect the Zeiss Conquest Gavia 85 scope and Canon EOS 90d camera with this product?
Asked by: CHANGHO
Yes. The Novagrade Digiscoping Adapter for Canon DSLR Cameras will adapt the Gavia 85 to the Canon 90D.
Answered by: Dan W
Date published: 2024-05-22

question

Would this work with a Kowa TSN-821M?
Asked by: Anonymous
It did not work with my Pentax eyepiece, which had a diameter of about 61 mm. So measure your eyepiece outside diameter carefully before you buy. I actually bought an inexpensive eyepiece to use with the converter. But if you expect great quality photos, I think you'll be a bit dissappointed. Manual focus is required using the scope's focus nob, which may take some practice. Also, you lose stops due to th effect of the long telephoto lens effect.
Answered by: Ronald S.
Date published: 2018-08-25

question

Will this work for using on a Leopoldo spotting scope using a canon ti3?
Asked by: Anonymous
It's the diameter of the eyepiece on the spotting scope that matters. It will work as long as the scope's eyepiece lens diameter is less than the specified diameter that the adapter will take (about 60mm). But do not expect the same quality of photos as you would get on a camera lens, even a poor one. It may have to do with the glass or plastic insert that is built into the Novagrade adapter - it may be reducing the quality of the image. Or it could be that the alignment of the lens on the scope with the camera sensor is not as exact as you would have when using a camera lens that is made to mount to a specific camera. So it depends on your objective as a photographer, that is, to what purpose you are going to use the image created. Also, taking pictures is more complicated in that autofocus won't work, and of course, when using such a long lens as the scope, the amount of light reaching the sensor is significantly reduced, making focussing even tougher. You may need to zoom in on the subject using the camera's lcd to get really accurate focus. Ideally, for daylight photography, you would have a hood over the camera so you could get a really clear view of the image on the camera lcd. You will really need excellent light to photograph birds or any other moving object. I have not tried to use it to photograph still objects under controlled conditions.
Answered by: Ronald S.
Date published: 2020-06-30

Does the image produced fill the full camera ...

Does the image produced fill the full camera detector - the full field of view? Or do you get a little circle image in the middle of the frame?
Asked by: Peter
It does not behave as a regular camera lense. There is a significant amount of vingnetting. you have to crop quite a bit.
Answered by: Pavan
Date published: 2021-04-01

question

an you advise please would this be suitable for the Leica Televid APO 82 with 25- 50x WW ASPH Vario eyepiece to be mated to a Canon 5D Mk111?Await your replyMany ThanksGreg
Asked by: Greg F.
I use EOS REBEL XSi to Leica Televid APO 82 with 25-50X eyepice. Its very easy to use. 4 compressions rings are included. But Leica needs no compressions ring.
Answered by: Hideki K.
Date published: 2018-08-25
  • y_2026, m_7, d_5, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_1007578, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It