SHAPE Canon C100 C300 C500 Shoulder Mount

The difference between this product and the Offset Version, which is B&H # SHC100OF, is the Offset configuration itself. The Standard Version has 2 longer 15mm rods that go straight from the handles to the shoulder pad. The offset rig has two shorter sets of 15mm rods and an offset bracket. Some prefer the offset design because it puts the camera directly in front of your eyes for use.https://bhpho.to/2b1Xcio

Hello Tania,Thank you for contacting us! Unfortunately, this camera support was specifically designed for the C300 Mark i. We cannot guarantee it will fit for the Sony FS7M2.We do have a line of products for the Sony camera that will give you several interesting solutions. We invite you to visit our Sony FS7Mii page on our website.https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspxWe hope this helps and we thank you for your interest in our products.The SHAPE team

Hello JimThank you for your question! For the C100 Mark ii, you do not need anything else than this rig. The main baseplate of this shoulder mount was specifically designed for the Canon C series cameras (C100-C300-C500). So it should fit fine. As for the 5D Mark IV, if the optical center is not an issue, it should be ok, if it is, you can still use it but adding accessories like a mattebox might be a bit tricky.For more detailed info, please call us at 1.888.968.9810We hope this answers your questions and we thank you for your interest in our products.The SHAPE team

The canon side handle can be relocated but you have to buy an accessory for that. I have it and it's pretty much essential to have the side handle adapter.

I use it with a C200 with no problems.

Hello Julia,Thank you for your question! The baseplate in this rig was not designed for the C100 and C300 MKii. It was designed to fit the C300 mark i. It can work, but won't be ideal and might not respect the optical center of those cameras. For instance, the C300 mark ii is a bigger camera, so if you want to add a mattebox, it might not be centered. At that point, we cannot guarantee it will fit perfectly. We hope this helps and we thank you for your interest in our products. The SHAPE team

Hello LaurenThank you for your question! We would indeed recommend this rig, especially if you are using a camera from the C series, (C100-C300-C500), as this unit was specifically designed for this line of cameras. As with all our our products, this rig has threaded holes (1/4-20 & 3/8-16) underneath the main baseplate, allowing you to quickly switch from handheld to tripod, without hassle.We strongly recommend this unit.We hope this answers your question and we thank you for your interest in our products.The SHAPE team