Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Key Features
- Distributes HDMI Signal to 4 Displays
- HDMI 1.4 Connections
- Supports Resolutions Up to 3840x2160 4K
- Supports Up to 36-Bit Deep Color
The MuxLab HDMI 1 x 4 Splitter allows you to distribute an HDMI signal to up to four HDMI displays. Featuring HDMI 1.4 connections, it supports resolutions up to 3840 x 2160 UHD 4K @ 24/25/30 fps, including 1080p @ 60 fps. It supports up to 12-bit color depth per RGB channel, for a total of 36-bit Deep Color. It also supports 3D video and LPCM 7.1Ch audio, Dolby TrueHD audio, and DTS-HD Master Audio.
More DetailsSee any errors on this page?
Does this item work on monitors and TVs or just ...
Does this item work on monitors and TVs or just monitors?
Any monitor or tv with HDMI.
Date published: 2020-09-30
Does it come with a power supply?
Does it come with a power supply?
Yes it does.
Date published: 2020-02-05
Does this product mirror or extend the monitors?
Does this product mirror or extend the monitors?
It can extend and mirror!
Date published: 2020-03-11
question
Has anybody used this device to feed HDMI over 200ft Cat5/6 to Black Magic switcher input?
We have tried to run 4 tv's 2 at 50ft and 2 at 100 - 200ft strictly HDMI off of this thing and it usually has an issue where 1 TV will turn off or loose signal. 4 tv's under 50ft usually works fine. Don't know about a single run though. if your converting over to cat 5 it would fall more on the hdmi to cat 5 converter I believe. This does not input or output cat 5/6.
Date published: 2018-08-25
question
by having this splitter how long my HDMI output cable can be?
40 feet is the longest I would go with HDMI to maintain signal quality. I use a 20 ft output cable with this splitter and it works great. However, if it sits for a long time without a signal going through it...it might go on standby and you'll have to reset the unit.
Date published: 2018-08-25
question
Will this unit simultaneously drive more than one monitor?
yes, however some blue lights corresponding to each feed in front of the unit may not turn on even if the unit is working.
Date published: 2018-08-25
question
Will this unit also split the audio signal?
Yes.
Date published: 2018-08-25
question
Will this splitter reset all outputs when a new devise is attached to the output?
I agree with Jan on this. It's not always consistent. I find that if the device is powered (like a gopro) it picks it right up. If it's a mini recorder, or a device that runs off of another units power (thunderbolt from a macbook) it might not pick it up.
Date published: 2018-08-25